Cypress Semiconductor CY8CKIT-037 PSoC 4 Pioneer Kit BLDC Evaluation Kit for PSoC 4 Pioneer Kit

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

CY8CKIT-037 PSoC 4 Motor Control Evaluation Kit, Cypress

The CY8CKIT-037 kit is used in conjunction with a PSoC 4 CY8CKIT-042 Pioneer kit (RS 124-4183) to evaluate DC motor control applications. The kit supports BLDC (BrushLess Direct Current) motors, PMSM (Permanent Magnetic Synchronous Motors) and Stepper motors. PSoC Creator IDE allows concurrent hardware and software design.

Example Projects

• Single-shunt FOC BLDC Motor Control
• Sensorless FOC BLDC Motor Control
• Sensored BLDC Motor Control
• Sensorless BLDC Motor Control
• Stepper Motor Control

CY8CKIT-037 Board Features

• 4 x IR2101 High Side/Low Side MOSFET gate drivers
• 8 x IRFU3607 power MOSFETs configured as 4 x Half-Bridges
• Phase current detecting and processing circuit
• Hall and Back-EMF sensing circuits
• Potentiometer for manual speed control
• Reset and Run/Stop pushbuttons
• Status LED
• CY7C65213 USB-UART Bridge controller
• Power supply input protection circuit
• LM5005MHX +12V @ 600mA DC/DC switching regulator
• miniUSB socket for PC connection
• Screw connector for motor windings
• Screw connector for 24-48Vdc power supply
• Barrel jack for 12-24V @ 2A power supply
• Arduino-format Shield header for CY8CKIT-042 connection
• Test points

Supplied with

24V @ 2A Power supply adapter, BLDC motor (BLY172S-24V-4000) with sinusoidal back-EMF, USB Type-A to mini-B Cable, Configuration jumpers, 2.5A Fuse, Screwdriver, Quick start guide

Motor Controllers & Drivers, Cypress

Specificaties
Kenmerk Waarde
Kit Name PSoC 4 Pioneer Kit
Kit Classification Evaluation Kit
For Use With PSoC 4 Pioneer Kit
Motor Type BLDC
65 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
170,51
(excl. BTW)
206,32
(incl. BTW)
Aantal stuks
Per stuk
1 +
170,51 €
Related Products
The YROTATE-IT-RX23T board with its RX23T microcontroller is ...
Description:
The YROTATE-IT-RX23T board with its RX23T microcontroller is capable of driving 3-phase permanent magnet AC motors up to 48Vdc with a peak current of 5A. It features an intuitive PC GUI to manage the motor speed, display the vector control ...
The SAM E5X micro-controller series features a 32-bit ...
Description:
The SAM E5X micro-controller series features a 32-bit ARM Cortex-M4 processor with Floating Point Unit (FPU), running up to 120 MHz,up to 1 MB Dual Panel Flash with ECC, and up to 256 KB of SRAM with ECC .It also ...
The STEVAL-IHM029V2 is a low-cost universal motor control ...
Description:
The STEVAL-IHM029V2 is a low-cost universal motor control evaluation board designed for the home appliance market, with particular focus on vacuum cleaners, food processors and power tools. This system features the 20-pin, 8-bit STM8S103F2 microcontroller running at 16 MHz (user-trimmable ...
The STEVAL-IHM038V1 system evaluation board implements a BLDC/PMSM ...
Description:
The STEVAL-IHM038V1 system evaluation board implements a BLDC/PMSM fan controller board which is based on the SLLIMM™-nano (small low-loss intelligent molded module) STGIPN3H60 and STM32F100C6T6B microcontroller. The STEVAL-IHM038V1 incorporates a complete inverter stage and a control stage to drive a ...