- RS-stocknr.:
- 203-6952
- Fabrikantnummer:
- SL353HT
- Fabrikant:
- Honeywell
30 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
40 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk (in een verpakking 10)
€ 1,253
(excl. BTW)
€ 1,516
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
10 - 40 | € 1,253 | € 12,53 |
50 - 90 | € 1,063 | € 10,63 |
100 - 990 | € 0,98 | € 9,80 |
1000 - 1490 | € 0,944 | € 9,44 |
1500 + | € 0,885 | € 8,85 |
*prijsindicatie |
- RS-stocknr.:
- 203-6952
- Fabrikantnummer:
- SL353HT
- Fabrikant:
- Honeywell
Wetgeving en conformiteit
- Land van herkomst:
- CN
Productomschrijving
Honeywell SL353 Series Digital Hall-effect Sensor
The Sl353 series sensor ICs 9internal circuits) have been designed to offer the user a small, versatile, digital hall0effect device operated by the magnetic field of a permanent magnet or an electromagnet. They have a low power requirement and are sited to many possible applications. They are able to operate from a supply voltage as low as 2.2 V helping with energy efficiency. They can respond to either a North or South pole. This helps reduce instillation time as the user does not need to identify the magnetic polarity.
The SLS353HT has been designed as a High Duty Cycle unit and is ideal for applications requiring a high switching speed and a lower current then standard Hall Effect sensors.
The SLS353LT has been designed as a very Low Duty Cycle unit and thus ideal for applications requiring a low switching speed but with a requirement to extend battery life and operate with an extremely low current drain.
The SLS353HT has been designed as a High Duty Cycle unit and is ideal for applications requiring a high switching speed and a lower current then standard Hall Effect sensors.
The SLS353LT has been designed as a very Low Duty Cycle unit and thus ideal for applications requiring a low switching speed but with a requirement to extend battery life and operate with an extremely low current drain.
Features:
Energy efficient: SL353HT 0.33 mA typical, SL353LT 1.8 μA typical
Push-pull output does not require external pull-up resistor
Non-chopper stabilized design
SOT-23 sub miniature package size requires less PCB space
Energy efficient: SL353HT 0.33 mA typical, SL353LT 1.8 μA typical
Push-pull output does not require external pull-up resistor
Non-chopper stabilized design
SOT-23 sub miniature package size requires less PCB space
Honeywell Micropower Hall Effect Sensor, 5 to 110Gs, 3-Pin - SL353 Series - SL353HT
Choose this micropower Hall effect sensor from Honeywell for reduced power consumption in your sensing applications. Its BiCMOS (bipolar complementary metal-oxide semiconductor) technology and an innovative timing circuit turn power on for only a short time to ensure a high degree of energy efficiency. The sensor is simple to install as it responds to either a north or south pole, meaning you don't have to identify magnet polarity beforehand. This unit is compatible with a low supply voltage of 2.2V, so it's suitable for use with mobile, battery-operated devices.
Features & Benefits
• Thermally balanced integrated circuit provides stable operation over a wide temperature range of -40°C to +85°C for use in demanding environments
• Omnipolar function makes it compatible with both high and low-duty cycles for improved versatility in use
• Miniature size requires less space on a PCB (printed circuit board) for maximum space efficiency
• Omnipolar function makes it compatible with both high and low-duty cycles for improved versatility in use
• Miniature size requires less space on a PCB (printed circuit board) for maximum space efficiency
Applications
• Mobile printer head position sensing
• Remote battery-operated water meters
• Hand-held medical and dentistry equipment
• Remote battery-operated water meters
• Hand-held medical and dentistry equipment
Does this sensor require any external components to operate?
No, the push-pull output doesn't need an external pull-up resistor and works with most electrical circuits for greater ease of use.
Hall Effect Sensors, Honeywell
Specificaties
Kenmerk | Waarde |
---|---|
Sensor Type | Hall Effect Sensors |
Mounting Type | Surface Mount |
Magnetic Type | Omnipolar |
Maximum Operating Supply Voltage | 5.5 V |
Minimum Operating Supply Voltage | 2.2 V |
Package Type | SOT-23 |
Pin Count | 3 |
Maximum Operating Temperature | +85 °C |
Minimum Operating Temperature | -40 °C |
- RS-stocknr.:
- 203-6952
- Fabrikantnummer:
- SL353HT
- Fabrikant:
- Honeywell