Absolute Encoder RS PRO 6000rpm SSI-Gray Hollow 10 → 32 V dc

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

WDGA58E - Magnetic Absolute Encoders SSI, 58 mm

Magnetic absolute RSA 58E SSI encoders

SSI (Synchronous Serial Interface)
Single-/multiturn technology (13 bit / 13 bit)
Maintenance-free
Environmentally friendly
32 bit processor
Stainless steel shaft
Operating temperature: -40 °C to +80 °C

Specificaties
Kenmerk Waarde
Encoder Technology Absolute
Maximum Revolutions 6000rpm
Output Signal Type Gray
Shaft Type Hollow
Supply Voltage 10 → 32 V dc
Shaft Diameter 12mm
Resolution 13 Bit
Steps Per Revolution 16384Steps
IP Rating IP67
Interface SSI-Gray
Overall Width 58 Dia.mm
Overall Depth 44.5mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +80°C
Switching Frequency 200 kHz
Mounting Type Hollow Shaft Flange
Current Rating 80 mA
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
350,76
(excl. BTW)
424,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
350,76 €
Related Products
Baumer BMSV 58S synchro flange absolute encoders series ...
Description:
Baumer BMSV 58S synchro flange absolute encoders series are robust and reliable even when exposed to heavy shock and vibration loads. Short circuit-proof 2 m cable Aluminium housing and flange Magnetic sensing Resolution: 12 bit High resistance to shock and ...
Encoder single- or multi turn / SSIPrecise magnetic ...
Description:
Encoder single- or multi turn / SSIPrecise magnetic sensingResolution max. 32 bit (14 bit ST, 18 bit MT)Angular accuracy up to ±0.15°Additional incremental signalsHigh protection High resistance to shock and vibrations.
Solid shaft with clamping flange. Encoder single- or ...
Description:
Solid shaft with clamping flange. Encoder single- or multiturn / SSIPrecise magnetic sensingResolution max. 32 bit (14 bit ST, 18 bit MT)Angular accuracy up to ±0.15°Additional incremental signalsHigh resistance to shock and vibrations.
The DFS60 programmable incremental encoders can be programmed ...
Description:
The DFS60 programmable incremental encoders can be programmed to produce any ppr from 1 to 10000. In addition , the output signals are software selectable: TTL/RS422 or HTL/Push-pull, making the DFS60 a truly universal incremental encoder. The programming tool consists ...