ON Semiconductor, MC14521BDG

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The MC14521B consists of a chain of 24 flip-flops with an input circuit that allows three modes of operation. The input will function as a crystal oscillator, an RC oscillator, or as an input buffer for an external oscillator. Each flip-flop divides the frequency of the previous flip-flop by two, consequently this part will count up to 224 = 16,777,216. The count advances on the negative going edge of the clock. The outputs of the last seven-stages are available for added flexibility.

All Stages are Resettable
Reset Disables the RC Oscillator for Low Standby Power Drain
RC and Crystal Oscillator Outputs Are Capable of Driving External Loads
Test Mode to Reduce Test Time
VDD' and VSS' Pins Brought Out on Crystal Oscillator Inverter to Allow the Connection of External Resistors for Low-Power Operation
Supply Voltage Range = 3.0 Vdc to 18 Vdc
Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load over the Rated Temperature Range.

Specificaties
Kenmerk Waarde
Logic Function Frequency Divider
Minimum Pulse Width 120 ns
Maximum Propagation Delay Time @ Maximum CL 2600 ns @ 50 pF
Maximum Quiescent Current 150µA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 16
Dimensions 10 x 4 x 1.5mm
Height 1.5mm
Length 10mm
Maximum Operating Temperature +125 °C
Automotive Standard AEC-Q100
Minimum Operating Temperature -55 °C
Minimum Operating Supply Voltage 3 V dc
Width 4mm
Maximum Operating Supply Voltage 18 V dc
Propagation Delay Test Condition 50pF
75 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 25)
0,616
(excl. BTW)
0,745
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
25 +
0,616 €
15,40 €
*prijsindicatie
Verpakkingsopties