Omron Voltage Monitoring Relay With SPDT Contacts, 1 Phase, 24 V ac/dc

  • RS-stocknr. 819-3286
  • Fabrikantnummer K8AK-VS2 24VAC/DC
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Omron K8AK-VS/VW Monitoring Relays

Manual resetting and automatically resetting supported by one relay
Pre-alarm monitoring mode
Compact housings
Resistant to high-frequency noise
Compliance with global power and safety standards

The Omron K8AK series monitoring relays are expertly designed for accurate and reliable monitoring of industrial facilities and equipment. The K8AK-VW/VS relays are ideal for monitoring overvoltages and undervoltages, which the K8AK-VW can do simultaneously.

K8AK-VS/VW

K8AK-TH

K8AK-VS/VW

K8AK-VS2 Monitoring Relay.

• Monitors over and under voltages.
• Manual reset and auto resetting supported by 1 relay.
• One SPDT output relay. 5 A at 250 V ac (resistive load)
• Can be normally closed or normally open. NC/NO.
• LED output status indicator.
• Process control signal (0 to 10 V) current splitter input supported.
• Input frequency 40 Hz to 500 Hz
• Inputs isolated from the power supply

K8AK-VS2 24 VAC/DC Model.

• Monitoring Relay.
• Power supply 24 V ac/dc.
• Setting range 1 to 10 V ac/dc, 3 to 30 V ac/dc, 15 to 150 V ac.dc.

Features and Benefits.

• Power supply (isolated) 24 V ac/dc, 100 to 240 V ac.
• Manual/ Automatic reset (switchable)
• Manual reset – Turn OFF the power supply for minimum of 1 sec.
• Power on lock time 1 s or 5 s (using DIP switch)
• Green LED Power (PWR)
• Yellow LED Relay output (RY)
• Red LED Relay output (ALM)
• One SPDT relay (NO/NC) using DIP switch
• DIN Rail Mounted
• Weight 150 g
• Case material PC and ABS, UL 94 V-0
• Colour N1.5
• Protection IP20

What is a Monitoring / Measuring Relay?

A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive input signals then monitor them and then output an alarm signal when a set value is reached (alarm relays). The relays protect your equipment against over voltage and over current faults. Monitoring relays monitor AC power supplies, voltage and current, analogue signals detecting unusual activity in equipment against set alarm thresholds.

Types of Monitoring Relays Available?

• Motor protection relays
• Temperature monitoring relays
• Water level control relays
• Voltage
• Current

Standards

UL 60947-5-1, UL 508, IP 20

Specificaties
Kenmerk Waarde
Monitoring Application Voltage
Supply Voltage 24 V ac/dc
Contact Configuration SPDT
Voltage Sensitivity Overvoltage, Undervoltage
Electrical Phase 1
Voltage Sensing Range 1 → 10 V ac/dc, 3 → 30 V ac/dc, 15 → 150 V ac/dc
Time Delay 0.1 → 30 s
Minimum Voltage Sensed 1 V ac/dc, 3 V ac/dc, 15 V ac/dc
Width 100
Length 22.5mm
Operating Temperature Range -20 → +60 °C
Series K8AK-VS
Maximum Operating Temperature +60°C
Maximum Voltage Sensed 10 V ac/dc, 30 V ac/dc, 150 V ac/dc
Minimum Operating Temperature -20°C
Dimensions 22.5 x 100 x 95 mm
Height 95mm
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
68,35
(excl. BTW)
82,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
68,35 €
Related Products
Low noise a.c. compact modular contactors and accessories ...
Description:
Low noise a.c. compact modular contactors and accessories are ideal for heating lighting and building service type applications. The units are designed for mounting in control panels or cabinets on symmetrical DIN rail or they may be housed in modular ...
Turck ES-FA series of safety modules proivde the ...
Description:
Turck ES-FA series of safety modules proivde the user with a monitoring solution with emerency stop function. Designed to monitor a +24VDC source within hard / relay contacts within a single or dual channel installation. 24V AC/DC operationPlug-in terminal block ...
The IL9079 is an undervoltage relay for detecting ...
Description:
The IL9079 is an undervoltage relay for detecting short interruptions. Enclosure version for the IL 9079 has a depth of 59 mm. Terminals are at the bottom for installation systems and industrial distribution systems according to DIN 43 880. Features ...
22.5mm wide All devices can be digitally set ...
Description:
22.5mm wide All devices can be digitally set and have an LCD display, a fault memory can be switched onSimultaneous monitoring for overvoltage and undervoltage over the complete rangeSupply voltage 24Vac/dcHysterisis 0.1- 300VStarting by-pass Time: 0.1 - 20sOff Delay: 0.1 ...