Omron Phase Monitoring Relay With DPDT Contacts, 3 Phase, 200 480 V ac

  • RS-stocknr. 819-3254
  • Fabrikantnummer K8AKPH1200500VAC
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Omron K8AK-PW/PM/PH/PA Monitoring Relays

The Omron K8AK series monitoring relays are expertly designed for accurate and reliable monitoring for industrial facilities and equipment.
The K8AK-PW/PM monitoring relays are designed to bear greater resistance to inverter noise, suitable for monitoring 3-phase power supplies.
The K8AK-PH relays are ideal for preventing issues with motor operation and assisting phase loss detection.
The K8AK-PA relays are suitable for 3-phase voltage asymmetry monitoring.

K8AH-PH1 Monitoring Relay.

Resistant to inverter noise. Differentiates correct phases, phase sequence plus phase loss when power is on. Phase loss detection when the motor runs. 5 A (resistive load) at 250 V ac, DPDT x 1. Output status monitored by using LED indicator. Prevents reverse operation of motors

K8AK-PH1 Model.

3-phase, 3-wire model. Three-phase. Three-wire.
200 V ac to 480 V ac.
Relay output 1 x DPDT (double pole double throw).

Features and Benefits.

Input load 4.1 VA Automatic reset method.
One DPDT relay NC (normally closed).
Power (PWR) indicator – Green.
Relay (RY) output – Yellow.
Case is PC and ABS, UL 94-V-0, N1.5.
Weight 130 g.
DIN Rail mounted.

What is a Monitoring / Measuring Relay?

A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive input signals then monitor them and then output an alarm signal when a set value is reached (alarm relays). The relays protect your equipment against over voltage and over current faults. Monitoring relays monitor AC power supplies, voltage and current, analogue signals detecting unusual activity in equipment against set alarm thresholds.

Types of Monitoring Relays Available?

Motor protection relays Temperature monitoring relays
Water level control relays
Voltage
Current

Standards

EN 60947-5-1, UL 508, IP 40 (Terminals IP20).

Specificaties
Kenmerk Waarde
Monitoring Application Phase
Supply Voltage 200 480 V ac
Contact Configuration DPDT
Electrical Phase 3
Phase Sensitivity Phase Loss, Phase Sequence
Time Delay 0.1 s
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Dimensions 22.5 x 100 x 95 mm
Height 95mm
Operating Temperature Range -20 +60 °C
Width 100mm
Length 22.5mm
Series K8AK-PH
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
39 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was 56,90 €
50,86
(excl. BTW)
61,54
(incl. BTW)
Aantal stuks
Per stuk
1 +
50,86 €
Related Products
TF range up to 38 AmpsOverload protection class ...
Description:
TF range up to 38 AmpsOverload protection class 10 but does have a adjustable setting Phase loss sensitivityAutomatic or manual reset selectableSTOP and Test function Temperature consumption -25 → +60 °C.
Schneider Electric RM17/35 UB measurement and control relays ...
Description:
Schneider Electric RM17/35 UB measurement and control relays for 3 phase supplies, monitor correct sequences of phases L1, L2 and L3. It also monitors total loss of one or more phases, asymmetry, and over and undervoltage with independent adjustments. In ...
H3US and M3US relays control three-phase networks: Overvoltage ...
Description:
H3US and M3US relays control three-phase networks: Overvoltage between phases and undervoltage between phases.The H3USN relay controls three-phase networks: Overvoltage between phases and neutral, undervoltage between phases and neutral, and the absence of neutral.Multi-voltage products.Controls its own voltage ...
TELE GAMMA series AC and DC voltage monitoring ...
Description:
TELE GAMMA series AC and DC voltage monitoring relay. Multifunction monitoring in a slim easy to use package. The GAMMA series have a self-extinguishing plastic body with an IP rating of IP40. DIN Rail mountLED indicatorScrew terminals2 change over contactMultifunction. ...