Omron Current Monitoring Relay With SPDT Contacts, 1 Phase, 100 → 240 V ac

  • RS-stocknr. 819-3208
  • Fabrikantnummer K8AK-AS2 100-240VAC
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Omron K8AK-AS/AW Monitoring Relays

The Omron K8AK series monitoring relays are expertly designed for accurate and reliable monitoring for industrial facilities and equipment. The K8AK-AW/AS relays are suitable for undercurrent and overcurrent monitoring, which the K8AK-AW can do simultaneously.
Manual resetting and automatically resetting can be maintained by one relay.
Startup lock and operating time can be set individually.

K8AK-AS Series.

• Monitors over and under currents
• Use available current transformers (CT)
• One relay supports manual and automatic resetting
• Start-up lock and operating time can be set separately
• One SPDT (single pole double throw) output relay 5 A at 250 V ac resistive load
• Output relay can switch between normally open and closed
• LED indicator can be used to monitor output status
• Inputs are isolated from the power supply

K8AK-AS Models Available.

• K8AS-AS 24 VAC/DC – Stock number 8193204 • K8AK-AS1 100-240 VAC - Stock number 8193201
• K8AK-AS2 24 VAC/DC - Stock number 8193217 (if using other current transformers do not exceed the overload capacity)
• K8AK-AS2 100-240 VAC - Stock number 8193208 (if using other current transformers do not exceed the overload capacity)
• K8AK-AS3 24 VAC/DC - Stock number 8193214
• K8AK-AS3 100-240 VAC - Stock number 8193210
K8AK-AS3 – designed to be used with Omron K8AC-CT200L Current Transformer as direct input is not possible. Stock number 6118602

Added Features and Benefits.

• Power Supply – 200 to 240 V ac (24 V ac/dc • Reset method – Manual / automatic (switchable), Manual reset turn OFF the power supply for 1 s plus.
• Operating time setting range 0.1 s to 30 s
• Start-up lock time range (LOCK) – 0 to 30 s – lock timer starts when the input reaches 30% plus of the set value. (enabled only for overcurrent operation)
• Power indicator – Green
• Relay output indicator – Yellow
• Alarm outputs – Red
• Output relays – 1 SPDT relay (NO/NC switched use DIP switch) (dual in-line package)
• Case is PC and ABS, UL 94 V-0. Colour N1.5
• Weight 150 g
• DIN rail mounted

What is a Monitoring / Measuring Relay?

A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive input signals then monitor them and then output an alarm signal when a set value is reached (alarm relays). The relays protect your equipment against over voltage and over current faults. Monitoring relays monitor AC power supplies, voltage and current, analogue signals detecting unusual activity in equipment against set alarm thresholds.

Types of Monitoring Relays Available?

• Motor protection relays • Temperature monitoring relays
• Water level control relays

Applications.

• Industrial facilities • Industrial equipment

Standards

EN 60947-5-1 pollution level 2 installation category III, UL 508.
Terminal protection IP20

Specificaties
Kenmerk Waarde
Monitoring Application Current
Supply Voltage 100 → 240 V ac
Contact Configuration SPDT
Electrical Phase 1
Current Sensitivity Overcurrent, Undercurrent
Minimum Current Sensed 0.1A
Maximum Current Sensed 8A
Series K8AK-AS
Current Range 0.1 → 1 A, 0.5 → 5 A, 0.8 → 8 A
Width 100mm
Height 95mm
Maximum Operating Temperature +60°C
Minimum Operating Temperature -20°C
Operating Temperature Range -20 → +60 °C
Dimensions 22.5 x 100 x 95 mm
Length 22.5mm
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
105 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
71,19
(excl. BTW)
86,14
(incl. BTW)
Aantal stuks
Per stuk
1 +
71,19 €
Related Products
Created and designed to provide you with reliable ...
Description:
Created and designed to provide you with reliable information on how your system is performing. Using the relays enables you to monitor and detect power loss from damaged or contaminated panels quickly meaning that you can respond immediately. These RM35 ...
Schneider Electric RM17 U single-phase and direct current ...
Description:
Schneider Electric RM17 U single-phase and direct current voltage control relays that monitor over-voltage and under-voltage, with or without memory, or that operate in window mode. The overvoltage and undervoltage threshold values are adjusted via two graduated potentiometers that directly ...
Omron K8DT-AS/AW single phase current relays detect errors ...
Description:
Omron K8DT-AS/AW single phase current relays detect errors in motors and other equipment through current changes. Monitor AC or DC currents with one Relay.Use with commercially available current transformersWidth of 17.5 mm to reduce space required in panels.Push-In Plus Terminal ...
Omron K8DT-VS single phase voltage monitor relay detects ...
Description:
Omron K8DT-VS single phase voltage monitor relay detects abnormal voltages applies to equipment to protect against equipment failure. Can be used in either overvoltage or undervoltage mode. Monitor AC or DC currents with one Relay.Settings for the operating value, hysteresis, ...