Crouzet Current Monitoring Relay With SPDT Contacts, 1 Phase, 24 V dc

  • RS-stocknr. 463-3373
  • Fabrikantnummer 84871020
  • Fabrikant Crouzet
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Current Control Relays – EI

Threshold and hysteresis separately adjustable
Selection of over-current or under-current by means of a dip switch
(Operating range quoted is relative to nominal supply voltage (Un) )

Note

2 to 500mA (EIL), 0.1 to 10A (EIH) and 10 to 100A (EIT with CT) measurement ranges
Current transformer available for use with EIT control relays; stock no 283-6384

Specificaties
Kenmerk Waarde
Monitoring Application Current
Supply Voltage 24 V dc
Contact Configuration SPDT
Electrical Phase 1
Current Sensitivity Overcurrent, Undercurrent
Minimum Current Sensed 2mA
Maximum Current Sensed 500mA
Time Delay 0.1 → 3 s
Operating Temperature Range -20 → +60 °C
Maximum Operating Temperature +60°C
Height 99.3mm
Length 103.5mm
Minimum Operating Temperature -20°C
Dimensions 103.5 x 22.5 x 99.3 mm
Current Range 2 → 500 mA
Width 22.5mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24/12/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
131,25
(excl. BTW)
158,81
(incl. BTW)
Aantal stuks
Per stuk
1 +
131,25 €
Related Products
TELE GAMMA series AC/DC current monitoring for single ...
Description:
TELE GAMMA series AC/DC current monitoring for single phase. Featuring overcurrent and undercurrent monitoring and two change over contacts. The GAMMA series have a self-extinguishing plastic body with an IP rating of IP40. DIN Rail mountLED indicatorScrew terminalsMultifunction16.6 to 400HzFault ...
Thermistor motor protection relay Standard evaluation unit 22.5 ...
Description:
Thermistor motor protection relay Standard evaluation unit 22.5 mm enclosure screw terminal 2 change-over contacts US = 24 V-240 V AC/DC Manul/Remote-Reset with ATEX approval 2 LEDs (READY/TRIPPED) galvanic isolation Test/reset button Wire break monitoring Short circuit monitoring.
The MK9052 motor protection relay is used to ...
Description:
The MK9052 motor protection relay is used to prevent thermal overloads in motors (for example as caused by high switching frequencies, heavy start-up loads, single phase operation, interrupted cooling, high ambient temperature).Special thermistors (PTC resistors) developed specifically for motor protection ...
Compact, low cost unit, with LED 'tripped' indicator ...
Description:
Compact, low cost unit, with LED 'tripped' indicator and 1 change over relay contact. Reset is automatic when sensor has cooled down. Control and signalling voltages should have the same potential. Standard 22.5mm module width.