Siemens Thermistor motor protection relay Monitoring Relay With SPDT Contacts, 24 V ac/dc

  • RS-stocknr. 392-7267
  • Fabrikantnummer 3RN1010-1CB00
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

SIRIUS 3RN10 10 // 11 Thermistor motor protection relay

Work according to the closed circuit current principle (monostable design) and therefore self-monitoring with regard to wire breakage
Triggered when control voltage fails
Electrical separation for devices with AC control voltage
Overall width of 22.5 mm
Screw connection

3RN1 thermistor motor protection devices are thermal protection devices that are suitable, in combination with type A PTC resistors (cold conductors), for monitoring the temperature of electrical drives, transformer windings, oils, bearings, air etc.

Standards

EN 50081-2, EN 50082-2 and DIN VDE 0660 Parts 302 and 303 and IEC 34-11-2 Section 1 and 2

Note

!!! Phase-out product !!! This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the preferred successor proposed by the manufacturer: 175-2275 (3RN2010-1CA30)

Siemens 3RN1 Thermistor Relays

3RN1 thermistor relays are a range of thermal protection devices, which when used in conjunction with external PTC thermistors, offer temperature monitoring of electrical drives, transformers and other critical components such as bearings. The 3RN1 range operates on the principle of closed-circuit current and are therefore self monitoring in the event of sensor wire breakage.

Specificaties
Kenmerk Waarde
Monitoring Application Thermistor motor protection relay
Supply Voltage 24 V ac/dc
Contact Configuration SPDT
Temperature Sensitivity Overtemperature, Undertemperature
Temperature Sensing Range +60 → +180°C
Length 91mm
Operating Temperature Range -25 → +60 °C
Maximum Operating Temperature +60°C
Height 92mm
Width 22.5mm
Maximum Temperature Sensed +180°C
Minimum Temperature Sensed +60°C
Dimensions 91 x 22.5 x 92 mm
Minimum Operating Temperature -25°C
19 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
25 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was 79,64 €
72,40
(excl. BTW)
87,60
(incl. BTW)
Aantal stuks
Per stuk
1 +
72,40 €
Related Products
This product is used in conjunction with an ...
Description:
This product is used in conjunction with an external Core Balance Current Transformer (CBCT) and will detect residual sinusoidal alternating and pulsating direct currents. An adjustable trip level and time delay allows the product to be set according to the ...
The MK9052 motor protection relay is used to ...
Description:
The MK9052 motor protection relay is used to prevent thermal overloads in motors (for example as caused by high switching frequencies, heavy start-up loads, single phase operation, interrupted cooling, high ambient temperature).Special thermistors (PTC resistors) developed specifically for motor protection ...
22.5mm wide All devices can be digitally set ...
Description:
22.5mm wide All devices can be digitally set and have an LCD display, a fault memory can be switched onSimultaneous monitoring for overvoltage and undervoltage over the complete rangeSupply voltage 24Vac/dcHysterisis 0.1- 300VStarting by-pass Time: 0.1 - 20sOff Delay: 0.1 ...
The 72 series of relays from Finder are ...
Description:
The 72 series of relays from Finder are level control relays for conductive liquids. Sensitivity range (5 to 150) kΩ adjustableDelay time (0.5s or 7s) switch selectableEmptying or filling functions switch selectableDIN rail mounting.