Schneider Electric Current Monitoring Relay With DPDT Contacts, 24 → 240 V ac/dc

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

RM35 JA Series Current Control Relay

Schneider Electric RM35 JA current control relay for controlling alternating and direct currents in the event of under or overcurrent. Automatic alternating or direct current recognition and a wide measurement range. Monitors heating and lighting circuits and motor and generator load status.

Checks its own power supply
Clear hinged front cover
LED display of output status
DIN Rail mounting

Standards

NF EN 60255-6 and IEC 60255-6

Approvals

UL, CSA, GL, C-Tick, GOST

Schneider Electric Voltage, Current, Phase & Motor Protection

Specificaties
Kenmerk Waarde
Monitoring Application Current
Supply Voltage 24 → 240 V ac/dc
Contact Configuration DPDT
Current Sensitivity Overcurrent, Undercurrent
Minimum Current Sensed 0.15A
Maximum Current Sensed 15A
Time Delay 0.3 → 30 s
Current Range 150 mA → 15 A
Minimum Operating Temperature -20°C
Dimensions 72 x 35 x 90 mm
Height 90mm
Maximum Operating Temperature +50°C
Operating Temperature Range -20 → +50 °C
Length 72mm
Width 35mm
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
120,40
(excl. BTW)
145,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
120,40 €
Related Products
Omron K8DT-AS/AW single phase current relays detect errors ...
Description:
Omron K8DT-AS/AW single phase current relays detect errors in motors and other equipment through current changes. Monitor AC or DC currents with one Relay.Use with commercially available current transformersWidth of 17.5 mm to reduce space required in panels.Push-In Plus Terminal ...
Omron K8DT-LS conductive level controllers are Ideal for ...
Description:
Omron K8DT-LS conductive level controllers are Ideal for water level control. Offering sensitivity adjustment and an ON-delay timer that is ideal as a countermeasure for waves on liquid surfaces. Sensitivity adjustment from 10 k to 100 kΩ.Easy onsite adjustmentON-delay timer ...
TELE KAPPA series AC current monitoring for single ...
Description:
TELE KAPPA series AC current monitoring for single phase mains. Featuring overcurrent and undercurrent monitoring and a single change over contact. The KAPPA series have a self-extinguishing plastic body with an IP rating of IP40 and a DIN-rail TS 35 ...
Compact, low cost unit, with LED 'tripped' indicator ...
Description:
Compact, low cost unit, with LED 'tripped' indicator and 1 change over relay contact. Reset is automatic when sensor has cooled down. Control and signalling voltages should have the same potential. Standard 22.5mm module width.