Werma KombiSIGN 70 Beacon Unit Red LED, Steady Light Effect 230 V ac

  • RS-stocknr. 365-9958
  • Fabrikantnummer 84310068
  • Fabrikant Werma
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Stacking Signal Tower - KombiSIGN 70, 70mm, IP54

The WERMA KombiSIGN 70 modular stacking signal tower is an ideal solution to the increasing requirement for safety, machine productivity and reduced downtime. The modular design of these stacking towers enables quick and easy installation. Each KombiSIGN module is equipped with a bayonet fixing with integral contact system. Simply align the corresponding white marks and gently twist to lock them in place.

Features and Benefits

• Suitable for machine and manual Andon indication
• Modular system allows a completely free combination of optical and audible signal elements
• Mechanical and electrical connection of the elements in the space of seconds using a bayonet connection system
• Completely safe element changes (contact-voltage proof) without the need for tools
• Protection rating IP54 for use in normal conditions
• Up to 5 elements can be mounted on a terminal base
• Flexible combination of optical and audible elements
• Optical isolation due to O-ring seal stopping illumination of adjacent element
• Operating voltage for the continuous incandescent element is dependant on bulb fitted
• LED EVS elements have an extremely bright, random sequence of light to immediately grab attention
• Ultra-bright elements are up to 20 times brighter than conventional LED beacons. Intelligent electronics ensure operation at maximum brightness
• Vocal element plays customer specific audio files in mp3 format (sounds, alarms, music or spoken word)
• Operating temperature range is -20 to +50 °C
• Polyamide body with polycarbonate lenses, 70 mm diameter

Permanent Multi-colour LED Light Element

• Seven colours in one beacon
• Different colours can be triggered via the pins in the terminal element
• Positive and negative control logic
• The three basic colours (red/yellow/green) can be triggered using only two PLC outputs
• High light intensity

Note

Lamps are not supplied and must be purchased separately. Not compatible with KombiSIGN 71.

Approvals

UL listed, CSA, VDE

Specificaties
Kenmerk Waarde
Range KombiSIGN 70
Series 843
Component Type Beacon
Current Type AC
Light Effect Steady
Lens Colour Red
Bulb Type LED
Supply Voltage 230 V ac
Height 65.5mm
Base Diameter 70mm
IP Rating IP54
Housing Colour Black
Maximum Temperature +50°C
Minimum Temperature -20°C
37 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
27 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
40,44
(excl. BTW)
48,93
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
40,44 €
5 +
39,23 €
Related Products
The TOPLED series of LEDs, from Osram Opto ...
Description:
The TOPLED series of LEDs, from Osram Opto Semiconductors, are compact and highly reliable LED devices. As Osram’s first SMT LED with an integrated reflector, the TOPLED family of LEDs are ideal for applications such as: indoor/outdoor displays, display backlighting, ...
The CMD15-21 and CMD22 series SMT LEDs from ...
Description:
The CMD15-21 and CMD22 series SMT LEDs from VCC. Offers convection and vapor-phase reflow compatible, consistent high brightness, integral lensing for narrow angle light dispersion, designed to permit easy post-reflow solder joint inspection. Various LED colours available.
The RS PRO black 100mm extension stem is ...
Description:
The RS PRO black 100mm extension stem is designed to fit on to the bottom of the wiring module and on the top of the mounting foot for the LED signal tower. It is designed to raise the mounting position ...
A portable LED hazard warning lamp suitable for ...
Description:
A portable LED hazard warning lamp suitable for use in all Group II hazardous areas (zones 0, 1 and 2)Designed to run for extended periods as a stand alone unitStatic or flashing modeAmber lensDaylight cut-out mode optionUp to 2 months ...