Analog Devices AD5700-1BCPZ-R5, Modem HART FSK Modem FSK, 1.71 → 5.5 V, 24-Pin, LFCSP

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

HART Modems, Analog Devices

A range of modem (Modulator-Demodulator) devices which conform to the HART (Highway Addressable Remote Transducer) industrial communications protocol. HART communications frequently utilize 4-20mA networks and are widely used in Automation and Control applications. The HART standard provides for both point-to-point (analogue or digital) and multi-drop (digital only) modes of operation, the latter using a fixed loop current of 4mA.

HART Modem Communications

A range of devices which conform to the HART (Highway Addressable Remote Transducer) industrial communications protocol. HART communications frequently utilize 4-20mA networks and are widely used in Automation and Control applications. The HART standard provides for both point-to-point (analogue or digital) and multi-drop (digital only) modes of operation, the latter using a fixed loop current of 4mA.

Specificaties
Kenmerk Waarde
Modem Type HART FSK Modem
Modulation Technique FSK
Transmission Media Type Wire
Power Supply Type Single
Typical Operating Supply Voltage 1.71 → 5.5 V
Mounting Type Surface Mount
Package Type LFCSP
Pin Count 24
Dimensions 4.1 x 4.1 x 0.75mm
Height 0.75mm
Length 4.1mm
Maximum Operating Temperature +125 °C
Width 4.1mm
Minimum Operating Temperature -40 °C
500 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (On a Reel of 500)
7,502
(excl. BTW)
9,077
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
500 - 1000
7,502 €
3.751,00 €
1500 - 2000
7,299 €
3.649,50 €
2500 - 4500
7,107 €
3.553,50 €
5000 - 12000
6,925 €
3.462,50 €
12500 +
6,752 €
3.376,00 €
*prijsindicatie
Related Products
Three evaluation Board from Analog Devices designed to ...
Description:
Three evaluation Board from Analog Devices designed to allow assessment of the AD4000 series of low-power precision analogue-to-digital converters (ADCs). The boards feature differential or pseudo-differential 2 MSPS SAR ADCs and can be configured for single-ended inputs. A precision buffered ...
Differential Amplifiers by Analog Devices are integrated and ...
Description:
Differential Amplifiers by Analog Devices are integrated and optimised for differential signalling applications. These speciality amplifiers have inherent common mode rejection properties that provide a low harmonic distortion with an output gain and phase matching. Applications include driving or receiving ...
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals ...
A wide range of high current and high ...
Description:
A wide range of high current and high power operational amplifiers from Analog Devices. These op-amps are capable of driving low impedance loads and many can be operated from higher voltage supply rails than general purpose devices. Typical applications include ...