ST8500TR , PLC Modem SoC

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PH
Productomschrijving

The ST8500 is a fully programmable power-line communication (PLC) modem system-on-chip (SoC), which is able to run any PLC protocol in the frequency band up to 500 kHz. The device architecture has been designed to target CENELEC EN50065, FCC and ARIB compliant applications supporting all major PLC protocol standards such as ITU G.9904 (PRIME), ITU G.9903 (G3-PLC®) and many other possible PLC protocol specifications and evolutions.

Specificaties
Kenmerk Waarde
Modem Type Power Line Communication
Transmission Media Type Wire
Power Supply Type Single
Typical Operating Supply Voltage 1.1 V, 2.5 V, 3.3 V
Mounting Type Surface Mount
Package Type QFN
Pin Count 56
Dimensions 7 x 7 x 0.85mm
Height 0.85mm
Length 7mm
Maximum Operating Temperature +105 °C
Width 7mm
Minimum Operating Temperature -40 °C
100 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
8,93
(excl. BTW)
10,81
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
8,93 €
50 - 99
7,69 €
100 - 249
6,68 €
250 - 999
6,38 €
1000 +
5,07 €
Verpakkingsopties
Related Products
The CY8CPLC10 from Cypress Semiconductor is an integrated ...
Description:
The CY8CPLC10 from Cypress Semiconductor is an integrated power line communications chip with a Modem PHY and Network Protocol Stack. The device enables secure and reliable communication between different nodes on a power line.
Half Duplex synchronous/asynchronous Frequency Shift Keying (FSK) Modem. ...
Description:
Half Duplex synchronous/asynchronous Frequency Shift Keying (FSK) Modem.
The CY8CPLC10 from Cypress Semiconductor is an integrated ...
Description:
The CY8CPLC10 from Cypress Semiconductor is an integrated power line communications chip with a Modem PHY and Network Protocol Stack. The device enables secure and reliable communication between different nodes on a power line.
A range of devices which conform to the ...
Description:
A range of devices which conform to the HART (Highway Addressable Remote Transducer) industrial communications protocol. HART communications frequently utilize 4-20mA networks and are widely used in Automation and Control applications. The HART standard provides for both point-to-point (analogue or ...