Microchip Technology DSPIC33CK256MP508-I/PT, Microprocessor dsPIC 16bit 100MHz 80-Pin TQFP

  • RS-stocknr. 179-3965
  • Fabrikantnummer DSPIC33CK256MP508-I/PT
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Microchip Technology DSP Microcontroller

The Microchip Technology DsPIC33CH family type TQFP package, surface mount, 80-pin and 16-bit CMOS based DSP microcontroller has a voltage rating that ranges between 3V and 3.6V. It has 32Kbytes to 256K bytes program flash with ECC and 8K to 24K RAM. This enables the design of high-performance, precision motor control systems that are more energy-efficient. This microcontroller is used to control BLDC, PMSM, ACIM, SR and stepper motors quieter in operation and also provides extended motor life.

Features and Benefits

• 16-bit working registers
• 8-channel high speed PWMs with 250ps resolution
• Code efficient (C and Assembly) CPU architecture designed
• Communication interface UART, SPI/I2S and CAN bus
• Dual 40-bit fixed point accumulators (ACC) for DSP operations
• Fast 6 cycle divide
• Four DMA channels
• Four sets of interrupt context selected registers and accumulators per core for fast interrupt
• Integrated power-on reset and brown-out reset
• Modified Harvard architecture with 16-bit data and 24-bit instructions
• Nine MCCP/SCCP modules which Include timer, capture/compare and PWM
• One general purpose 16-bit timers
• Operating frequency is 100MHz
• Operating temperature ranges between -40°C and 85°C
• Safety features are DMT, ECC, WDT, CRC, CodeGuard, ICSP, MBIST and fail safe clock monitoring safety features
• Single-cycle MAC/MPY with dual data fetch and result write-back
• Support for DMX, LIN/J2602 protocols and IrDA
• Three 12-bit DAC/Analog comparator modules
• Three low power modes: Sleep, Idle and Doze
• Zero overhead looping

Certifications

• AEC-Q100 REVG
• IEC 60730

Specificaties
Kenmerk Waarde
Family Name DsPIC
Data Bus Width 16bit
Maximum Frequency 100MHz
I/O Voltage 3 → 3.6V
Fabrication Technology CMOS
Mounting Type Surface Mount
Package Type TQFP
Pin Count 80
Typical Operating Supply Voltage 3.6 (Maximum) V
Dimensions 12 x 12 x 1.05mm
Height 1.05mm
Length 12mm
Minimum Operating Temperature -40 °C
Automotive Standard AEC-Q100
Maximum Operating Temperature +85 °C
Width 12mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 07/02/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 119)
3,889
(excl. BTW)
4,706
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
119 +
3,889 €
462,791 €
*prijsindicatie
Related Products
Microchip’s dsPIC33E family of digital signal controllers (DSCs) ...
Description:
Microchip’s dsPIC33E family of digital signal controllers (DSCs) features a 70 MIPS dsPIC® DSC core with integrated DSP and enhanced on-chip peripherals. These DSCs enable the design of high-performance, precision motor control systems that are more energy efficient, quieter in ...
The Silicon Labs C8051F1xx family are analogue intensive, ...
Description:
The Silicon Labs C8051F1xx family are analogue intensive, integrated mixed-signal microcontrollers (MCU) with an 8-bit CPU capable of up to 100 MIPS. Available with either 10-bit or 12-bit ADC, together with up to 128 kB Flash and 8 kB RAM.Enable, ...
The Silicon Labs C8051F32x/34x families of microcontrollers (MCU) ...
Description:
The Silicon Labs C8051F32x/34x families of microcontrollers (MCU) are embedded with full-speed USB 2.0, simplifying the implemention of USB into your design. Their USBXpress software enables a complete host and device side solution. No external resistors, crystal, voltage regulator, EEPROM ...
The Silicon Labs C8051F58x/59x automotive and industrial microcontroller ...
Description:
The Silicon Labs C8051F58x/59x automotive and industrial microcontroller (MCU) devices are ideal for applications needing significant performance (50 MIPS) and integration (12-bit ADC) into a constrained space. Available in small form factor packages; 32-pin QFN/QFP (5 x 5 mm), 40-pin ...