RS PRO High Power Series Metal Oxide Varistor 1.62nF, Clamping 1200V, Varistor 710V

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Metal Oxide Varistors High Power

High power metal oxide varistors suitable for reducing transient voltage spikes in industrial power applications.

Single and two-hole fixing types for distribution bus-bar mounting
Insulated plastic case types for flat surface mounting
High-mass large-diameter zinc oxide element
Repeatable protection against high-energy transient voltages
Operating Temperature Range: -40°C → +85°C

Specificaties
Kenmerk Waarde
Varistor Voltage 710V
Maximum AC Voltage Rating 484V
Maximum DC Voltage Rating 640V
Clamping Voltage 1200V
Energy 320J
Series High Power
Diameter 32mm
Maximum Surge Current 10000A
Capacitance 1.62nF
Thickness 6mm
Dimensions 32 (Dia.) x 6mm
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
12,10
(excl. BTW)
14,64
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
12,10 €
10 - 24
11,62 €
25 - 49
11,13 €
50 - 99
10,65 €
100 +
10,17 €
Related Products
The HighE series of metal oxide varistors from ...
Description:
The HighE series of metal oxide varistors from Epcos offer a surge current capability up to 100kA and are suitable for heavy duty applications. Encapsulated in plastic housing, these disk-shaped metal oxide varistors have a wide operating range. Flame-retardant housing ...
The Bourns MOV-14D Series of 14 mm radial ...
Description:
The Bourns MOV-14D Series of 14 mm radial leaded varistor devices protects against over voltage transients such as lightning, power contact and power induction.The devices have a high current handling, high energy absorption capability and fast response times to protect ...
Standard radial epoxy-coated MOV with tinned-copper leads. Tinned ...
Description:
Standard radial epoxy-coated MOV with tinned-copper leads. Tinned copper wire leads with a ceramic body coated with epoxy resinRated for surge current (8//20 μs) and for energy (2ms).
Almost no energy consumption in stand-by modeAfter a ...
Description:
Almost no energy consumption in stand-by modeAfter a surge impulse the varistor works immediately in normal mode so there is no slip currentExcellent absorption at surge impulsesOperating temperature:–40 ºC to +85 ºC for types up to 95 VRMS–40 ºC to ...