RS PRO Single Sided Matrix Board FR2 With 34 x 64 1.02mm Holes, 2.54 x 2.54mm Pitch, 160 x 100mm
- RS-stocknr.:
- 100-4340
- Fabrikant:
- RS PRO
15 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
83 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 11,25
(excl. BTW)
€ 13,61
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 9 | € 11,25 |
| 10 - 24 | € 10,63 |
| 25 - 49 | € 9,84 |
| 50 - 99 | € 8,38 |
| 100 + | € 6,97 |
- RS-stocknr.:
- 100-4340
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
RS PRO Copper Free Matrix Prototyping Board (160 x 100mm)
A copper free matrix board for the development of analogue circuits enabling the secure mounting of wire wrap sockets and pins.
A single sided fully drilled prototyping board that offers a low cost and versatile solution to development allowing discreet components to be connected wire-to-wire or enabling plugs and wrap pins to be fitted.
The board conforms to DIN 41494 standards specifying practices for electronic equipment and mechanical structures of 19-inch series enabling the use with the standard rack-based electrical systems and card frames.
Matrix boards allow you to build a prototype PCB and keep all the parts of your circuit easily accessible. You can also use them as a pre-design layout matrix which can then be copied onto a standard PCB.
Features and Benefits
- Synthetic resin bonded paper base
- DIN 41612 connection
- Dimensions of 160 x 100mm
- FR2 material grade
- Hole diameter of 1.02 mm
- Hole pitch of 2.54 x 2.54 mm
- Single-sided
Why RS PRO?
Looking to reduce costs but keep the same quality?
With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.
Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.
With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.
Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.
Specificaties
Kenmerk | Waarde |
|---|---|
| Number of Sides | 1 |
| Hole Pitch | 2.54 x 2.54mm |
| Dimensions | 160 x 100mm |
| Length | 160mm |
| Width | 100mm |
| Base Material | Synthetic Resin Bonded Paper |
| Hole Diameter | 1.02mm |
| FR Material Grade | FR2 |
| Hole Layout | 34 x 64 |
| Connection | DIN 41612 |