RS PRO Hammer In Anchor 8 x 120, fixing hole diameter 8mm, length 120mm

Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

A countersunk, ribbed plug manufactured from PA6 nylon and fitted with a Zinc Plated or Grade 304 Stainless Steel drive screw. Suitable for use in Concrete, Brick, Concrete Blocks, & Natural Stone. Restricted use in Hollow bricks and blocks and Aerated Concrete Blocks. Hammer screws are suitable for use in most solid base materials ranging from reinforced concrete, concrete blocks, brickwork and natural stone. They can also be used in Aerated Concrete Blocks, but their load capacity will be limited by the strength of the block. Hammer screws can also be used in Hollow Base Materials but their use will be restricted by the thickness of the wall of the brick or block.

Drive Screw
Countersunk Collar
Ribbed Plug
Applications:
Timber Battens, Frame Ties, Electrical Boxes, Suspended Ceiling Trim, Conduit clips.

Specificaties
Kenmerk Waarde
Thread Size 8 x 120
Length 120mm
Fixing Hole Diameter 8mm
Maximum Fixing Thickness 80mm
24 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Bag of 10
6,54
(excl. BTW)
7,91
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 +
6,54 €
0,654 €
*prijsindicatie
Related Products
An all steel , hammer in fixings offering ...
Description:
An all steel , hammer in fixings offering increased fire resistance. Suitable for use in concrete, masonry and some natural stone. Zinc plated and yellow passivated minimum 5μm. Wire Hangers are suitable for use in solid concrete, hard concrete blocks, ...
The fischer DUOPOWER offers very good hold values ...
Description:
The fischer DUOPOWER offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best ...
RS PRO deformation controlled anchor system for use ...
Description:
RS PRO deformation controlled anchor system for use in concrete with a compressive strength greater than 20N/mm2These anchors are suitable for various jobs for non-structural applications in both cracked and non-cracked concrete. The system includes setting punches which means the ...
A self tapping anchor for suspending threaded rod. ...
Description:
A self tapping anchor for suspending threaded rod. Ankerbolt socket made of carbon steel, hardened and heat treated zinc platedFor use in concrete, brick and some natural stone.