Pegler Yorkshire Brass Reduced Bore Ball Valve 1/2 in BSP 2 Way

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Chromium Plated Brass Servicing Valve

WRC approved
Brass chromium plated reduced bore ball valves manufactured to BS6675
Used for isolating hot or cold water systems, to carry out repairs or replacements, without affecting the rest of the system and without having to drain down large volumes of stored water
Pressure rating 16 bar at 30°C (cold), 5 bar at 120°C (hot)

Approvals

WRc

Standards

BS 6675

Specificaties
Kenmerk Waarde
Attachment Type Compression
Threaded Connection 1/2 in BSP
Body Material Brass
Compression Fitting Size 15mm
Thread Size 1/2in
Safe for Use With Water
Maximum Working Pressure 16 bar
Connection Size mm 15mm
Connection Size inch 1/2in
Type 2 Way
31 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
5,99
(excl. BTW)
7,25
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
5,99 €
5 - 9
5,81 €
10 +
5,61 €
Related Products
The M10S series from Spirax Sarco is a ...
Description:
The M10S series from Spirax Sarco is a 3-piece body ball valve that has been designed to be used as an isolating valve, not a control valve. It is suitable for use with many industrial fluids. Blow-out proof stems protect ...
S.100/101 reduced bore ball valves with either 'L' ...
Description:
S.100/101 reduced bore ball valves with either 'L' or 'T' port configuration. The valves are suitable for oil, air, water, saturated steam or high temperature hot water services in domestic, commercial and industrial applications. T-Port Configuration Valves are:• 486-243 - ...
A 2/2 way ball valve with a hand ...
Description:
A 2/2 way ball valve with a hand lever and female thread at both ends. Available in a range of thread sizes from G G1. Female thread with hand leverAir and water operating mediumsBrass housingLarge operating temperature range of -20 ...
Mountable in-line ball valve for closing fluid systems ...
Description:
Mountable in-line ball valve for closing fluid systems with a simple quarter turn of the handle. full flowOptimum sealing due to compensating "O" ringsExcellent resistance to scaling due to ball seal configuration.