Legris Manual Ball Valve Brass 1/4 in G 2 Way

  • RS-stocknr. 439-329
  • Fabrikantnummer 0402 07 13
  • Fabrikant Legris
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: FR
Productomschrijving

Quarter-turn Valve, Standard

Ball Valve, Standard, Padlockable and Panel Mount

These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.

Specificaties
Kenmerk Waarde
Attachment Type Threaded
Threaded Connection 1/4 in BSPP
Body Material Brass
Thread Size 1/4in
Safe for Use With Water
Maximum Working Pressure 40 bar
Connection Size mm 8mm
Connection Size inch 1/4in
Type 2 Way
65 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
22,77
(excl. BTW)
27,55
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
22,77 €
5 - 9
22,07 €
10 +
21,36 €
Related Products
Lockable lever as standard For easy installation and ...
Description:
Lockable lever as standard For easy installation and removalBall seals PTFEIntegrated stainless steel mounting insertsZ-dimension, valve end and union nut are compatible with type ... with position feedback sensor, incl. LED feedback Manual spring return lever ("Dead man") Pneumatic or ...
Double union ball valve type 355 PVC-U with ...
Description:
Double union ball valve type 355 PVC-U with solvent cement sockets. Used in many water transport applications, these valves have a radial fitting and removal device on both sides.The coloured handle ensures clear visibility among pipes and helps with visual ...
Compact ball valve for opening and closing fluid ...
Description:
Compact ball valve for opening and closing fluid systems in tight spaces and are suited to high pressures and temperatures. Good chemical compatibilityMaximum working pressure: 12 barWorking temperature: -20 → 80 °CRetaining nut: Nickel plated brassO rings: NBR.
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. Time efficient, no nonsense one ...