Schmersal AZ/AZM 200-B30-RTAG1P1 Emergency Exit Right Hand, For Use With AZM 200 Safety Switch

  • RS-stocknr. 880-1801
  • Fabrikantnummer AZ/AZM 200-B30-RTAG1P1
  • Fabrikant Schmersal
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Schmersal AZM200 Solenoid Interlock Switch

Solenoid interlocks demand accurate alignment of actuator and device, the patented AZM 200 solenoid interlock from Schmersal eliminates this problem due to newly developed sensor technology. The actuator and interlock can now have an offset of ± 5 mm and the actuator still engages the interlock. This simplifies the mounting and reduces regular maintenance and adjustment of the safety guard. As an additional installation feature, the AZM 200 has two slotted mounting holes, enabling a quick and smooth mounting on aluminium profiles or steel frames using just two screws. The slim, symmetrical design is ideally suited for installation on current profiles with a minimum width of 40 mm.
Three LED's indicate the operating state. Therefore, the operator always knows whether the door is released for unlatching. This interlock offers enormous advantages particularly for fences around hazardous areas with walk-in access. Due to the one-hand operation of the emergency handle, the hazardous area can be left quickly and safely, even during a power failure.
The AZM 200 increases machine availability through the integrated modern electronics. This is because intelligent diagnosis provides fast trouble-shooting. A fault does not lead to an immediate machine switch-off, the fault is first signalled so that the machine can be progressively shut down in a controlled manner.
The AZM 200 can even be wired in series with other AZM 200 solenoid interlocks and also with the Schmersal safety sensor CSS 180. This feature considerably reduces the wiring costs and simplifies the set-up of safety circuits.

Thermoplastic enclosure
Guard locking monitored
Electronic contact-free, coded system
Maximum length of the sensor chain 200 m
Self-monitoring series-wiring of 31 sensors
3 LEDs to show operating conditions
Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
Intelligent diagnosis
Manual release
IP67 to IEC/EN 60529

Actuators and Lockout Tag

Stock no. 880-1794 for sliding guards, left hand
Stock no. 880-1797 for sliding guards, right hand
Stock no. 880-1791 for one-hand emergency exit, left hand
Stock no. 880-1801 for one-hand emergency exit, right hand
Stock no. 880-1804 is a lockout tag

Note

Actuators must be ordered separately.

Standards

EN ISO 13849-1, IEC 61508, IEC 60947-5-3, EN 60947-5-1.

Approvals

TUV, cULus.

Specificaties
Kenmerk Waarde
Accessory Type Emergency Exit Right Hand
For Use With AZM 200 Safety Switch
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
24 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was 287,95 €
215,70
(excl. BTW)
261,00
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
215,70 €
10 - 14
208,94 €
15 +
201,80 €
Related Products
Two switches in one enclosureProblem free opening of ...
Description:
Two switches in one enclosureProblem free opening of stressed doors by means of bell-crank systemRobust designLong life - up to 1 million mechanical operationsHigh holding force of 3500 NAdjustable ball latch to 400 N2 cable entries M20 x 1.5.
2 positive opening contacts as standard, on guard ...
Description:
2 positive opening contacts as standard, on guard openingHead rotates in 90° steps giving 8 actuator entry pointsMinimum operating force for positive opening: 15NIngress protection IP671 x cable entry tapped M16 x 1.5 ISO or PG11Actuator needs ordering separately (see ...
3 positive opening contacts as standard, on guard ...
Description:
3 positive opening contacts as standard, on guard openingHead rotates in 90° steps giving 8 actuator entry pointsMinimum operating force for positive opening: 15NIngress protection IP672 x cable entries tapped M16 x 1.5 ISO or PG11Actuator needs ordering separately (see ...
The head is secured by tamper-resistant screws and ...
Description:
The head is secured by tamper-resistant screws and can be rotated allowing 8 possible actuator entry positions including front and end entryForced guided contacts - complies with EN 1088, IEC 947-5-1Painted die cast zinc bodyContacts break actuation travel; 6mmOperating temperature; ...