Sick RE11-SK Actuator, For Use With RE11-S Safety Switch

  • RS-stocknr. 797-4876
  • Fabrikantnummer RE11-SK
  • Fabrikant Sick
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MY
Productomschrijving

SICK RE1 & RE2 Series of Non-Contact Safety Switches

RE1 & RE2 magnetic safety switches are equipped with NC/NO contacts or equivalent N/O contacts which are treated directly with coded magnetic actuators. These types of safety system switches are particularly useful in areas where there may be a high level of contamination (these units are simple to clean and keep high hygiene standards).

Features and Benefits

• Response range from 7-9 mm.

• Magnetic sensor principle.

• Built-in LED response indicator.

• Performance level up to PL e / Cat. 4 (EN ISO 13849).

• Glass-fibre reinforced PPS rectangular housing.

• High tolerances for door misalignment.

• 2-3 contacts (see specifications).

• Enclosure rating IP67 (IEC 60529).

Typical applications

The RE1&2 series are compatible anywhere where a high standard of hygiene is necessary for operations. Typically, you'll find these types of safety switches where precise guidance of a safety door isn't always possible.

• Monitoring of safety doors & removable guards.

• Applications requiring a high standard of hygiene.

Note

The actuators are only coded in the sense that they have an identical magnetic combination making them type specific not individual example specific.

Specificaties
Kenmerk Waarde
Accessory Type Actuator
Actuator Type Magnetic
For Use With RE11-S Safety Switch
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
48 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
7,80
(excl. BTW)
9,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
7,80 €
10 - 14
7,48 €
15 +
7,14 €
Related Products
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
The SIRIUS 3SE5 Series hinge switch is designed ...
Description:
The SIRIUS 3SE5 Series hinge switch is designed for monitoring hinged doors and flaps. These mechanical position switches offer excellent protection from tampering thanks to the fixed, positive pivoting point connection between switch and door hinge. They have a standard ...
The D4GS-N IP67 rated safety door switch uses ...
Description:
The D4GS-N IP67 rated safety door switch uses rust-resistant materials and incorporates a drain opening as effective countermeasures against problems caused by water. Slim safety-door switch with a three-terminal contact constructionReversible design allowing either front or rear mountingKey mounting hole ...
These plastic guard lock safety door switches from ...
Description:
These plastic guard lock safety door switches from Omron rank among the strongest in the world with a holding force of 3,000 N, making them suitable for large, heavy doors. Two safety circuits and two monitor contacts provide an array ...