ROHM, 5 V LDO Regulator, 500mA, 1-Channel, ±2% 3+Tab-Pin, D2PAK BD450M5FP2-CZE2

  • RS-stocknr. 178-5801
  • Fabrikantnummer BD450M5FP2-CZE2
  • Fabrikant ROHM
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

The BD450M5FP2-C is low quiescent regulator. This regulator is therefore ideal for applications requiring a direct connection to the battery and a low current consumption.Ceramic capacitors can be used for compensation of the output capacitor phase. Furthermore, this IC also feature overcurrent protection to protect the device from damage caused by short-circuiting and an integrated thermal shutdown to protect the device from overheating at overload conditions.

Wide Temperature Range: -40℃ to +150℃
Wide Operating Input Range: 3.0V to 42V
Low Quiescent Current: 40μA (Typ.)
Output Current: 200mA
High Output Voltage Accuracy: ±2%
Over Current Protection (OCP)
Thermal Shutdown Protection (TSD)

Specificaties
Kenmerk Waarde
Output Voltage 5 V
Maximum Output Current 500mA
Package Type TO-263
Output Type Fixed
Mounting Type Surface Mount
Minimum Input Voltage 3 V
Maximum Input Voltage 42 V
Pin Count 3+Tab
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Number of Outputs 1
Quiescent Current 38µA
Typical Dropout Voltage @ Current 0.25 V @ 300 mA
Height 2.3mm
Automotive Standard AEC-Q100
Series BD4xxM5-C
Width 5.5mm
Length 6.5mm
Line Regulation 30 mV
Dropout Voltage Measurement Current 300 mA
Load Regulation 30 mV
Dimensions 6.5 x 5.5 x 2.3mm
Accuracy ±2%
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each (In a Pack of 5)
1,228
(excl. BTW)
1,486
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
1,228 €
6,14 €
25 - 45
1,072 €
5,36 €
50 - 95
0,954 €
4,77 €
100 - 245
0,846 €
4,23 €
250 +
0,826 €
4,13 €
*prijsindicatie
Related Products
Linear Technology presents step-up (boost) switching regulators with ...
Description:
Linear Technology presents step-up (boost) switching regulators with both synchronous and non-synchronous internal switches. The high efficient DC-DC converters have a wide range of input voltages and switching frequencies. Some products feature unique properties that can help increase battery run ...
The LTC®4366 surge stopper protects loads from high ...
Description:
The LTC®4366 surge stopper protects loads from high voltage transients. By controlling the gate of an external N-channel MOSFET, the LTC4366 regulates the output during an overvoltage transient. The load may remain operational while the overvoltage is dropped across the ...
The PAC1932/3/4 are two, three and four-channel power ...
Description:
The PAC1932/3/4 are two, three and four-channel power and energy monitoring devices. A high-voltage multiplexer sequentially connects the inputs to a bus voltage monitor and current sense amplifier that feed high-resolution ADCs. Digital circuitry performs power calculations and energy accumulation. ...
The MAX17690 is a peak current mode, fixed-frequency ...
Description:
The MAX17690 is a peak current mode, fixed-frequency switching controller specifically designed for the isolated flyback topology operating in Discontinuous Conduction Mode (DCM). The device senses the isolated output voltage directly from the primary-side flyback waveform during the off-time of ...