Texas Instruments ISO3086DW, Line Transceiver, RS-485, 16-Pin SOIC

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

RS-485 Line Drivers and Receivers, High Speed, Texas Instruments

A range of High Speed RS-485 Line Drivers, Receivers and Transceivers from Texas Instruments with data rates of 10 Mbit/s or over.

RS-485 Line Drivers and Receivers

Specificaties
Kenmerk Waarde
Number of Transmitters 1
Package Type SOIC
Mounting Type Surface Mount
Pin Count 16
Number of Receivers 1
Data Rate 20Mbps
Number of Transceivers 1
Interface Standards RS-485
Transmitter Signal Type Single Ended
Receiver Signal Type Single Ended
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Length 10.28mm
Height 2.35mm
Width 7.52mm
Number of Receivers per Line 256
Typical Dual Supply Voltage 3.3 V, 5 V
Power Supply Type Dual
Number of Drivers per Line 256
Dimensions 10.28 x 7.52 x 2.35mm
22 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
75 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
6,67
(excl. BTW)
8,07
(incl. BTW)
Aantal stuks
Per stuk
1 - 7
6,67 €
8 - 19
5,93 €
20 +
5,63 €
Vanwege het beperkte aanbod kan RS op dit moment geen backorders accepteren.
Verpakkingsopties
Related Products
The Maxim family of dual RS232 line drivers ...
Description:
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due ...
M-Bus (Meter-Bus) is a European standard (EN 13757-2 ...
Description:
M-Bus (Meter-Bus) is a European standard (EN 13757-2 physical and link layer, EN 13757-3 application layer) for the remote reading of gas or electricity meters.
Low Voltage Differential Signaling, or LVDS, is an ...
Description:
Low Voltage Differential Signaling, or LVDS, is an electrical signaling system that can run at very high speeds over cheap, twisted-pair copper cables. Applications: Firewire, SATA, SCSI.
A range of well-established high-performance JFET input, bipolar ...
Description:
A range of well-established high-performance JFET input, bipolar output operational amplifiers from Texas Instruments featuring low input bias currents and high slew rates. These op amps have low noise and low distortion and are suitable for a wide variety of ...