WJ Furse Copper Alloy Rod to Tape Clamp Max. Conductor Size 26 x 12mm Nominal Rod dia. 12.7mm

  • RS-stocknr. 153-2961
  • Fabrikantnummer CR105
  • Fabrikant WJ Furse
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Furse Rod to Tape Clamp (type A)

Furse Rod to Tape Clamp (Type A) is designed to connect earth rod to copper tape to complete earth rod assembly. Conductivity and mechanical strength are essential considerations in clamp design to ensure that an earthing system remains operative for many years.

Features

Corrosion resistance High-quality copper and aluminium alloys
Phosphor bronze fitting
Tightening torque 15 Nm

Applications

Used to connect earth rod to copper tape.

Standards

IEC/BS EN 62561-1 Class H
BS 7430
UL467

Designed for connection of flat tape conductor to an earth rod. Corrosion resistance, conductivity and mechanical strength are
essential considerations in clamp design to ensure an earthing system remains operative for many years. All Furse earth rod clamps
have high strength copper alloy bodies and screws e.g. aluminium bronze, phosphor bronze etc., commercial brass is not used
Tightening torque 15 Nm
UL467 (CR105)

Specificaties
Kenmerk Waarde
Material Copper Alloy
Nominal Rod Diameter 12.7mm
Maximum Conductor Size 26 x 12mm
Clamp/Clip Type Rod to Tape Clamp
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
5,156
(excl. BTW)
6,239
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
5,156 €
51,56 €
100 - 190
5,053 €
50,53 €
200 - 390
4,80 €
48,00 €
400 - 790
4,56 €
45,60 €
800 +
4,104 €
41,04 €
*prijsindicatie
Related Products
The RS Pro range of Brass bar, rod ...
Description:
The RS Pro range of Brass bar, rod and sheets, offer great machining qualities and a high degree of resistance to corrosion. Suitable for different types of applications. Toughness at all temperatures Corrosion resistance Low magnetic permeability Good machinability and ...
Furse non-metallic DC tape clips are designed to ...
Description:
Furse non-metallic DC tape clips are designed to fix conductors to a building or structure. High-grade polypropylene Easy installation Resists high pull off loads UV stabilised Non-brittle with high pull off loads Match bare and PVC covered copper and aluminium ...
Furse tape junction lamp is designed to connect ...
Description:
Furse tape junction lamp is designed to connect lightning protection to earthing system and facilitate periodic testing.The clamped connection is easily made/remade to allow for periodic testing. Manufactured from high quality copper and aluminium alloys Low resistance connection between overlapping ...
Furse Tape Crossover Clamp is designed for forming ...
Description:
Furse Tape Crossover Clamp is designed for forming cross, tee, through and right angle joints with tapes that are fixed to a building or structure. The screws are retained in 1 part of clamp with O rings when fitting conductor ...