Osram 854106, Electronic Fluorescent Light Starter, 36 → 65 W, 220 → 240 V ac

  • RS-stocknr. 192-1908
  • Fabrikantnummer 854106
  • Fabrikant Osram
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

OSRAM ST111/ST151/ST171 Starters

Introducing the ST111/ST151/ST171 series of fluorescent tube lamps starters from OSRAM. These high-quality devices have been designed to ignite every time, reliably and quickly. Each starter is a subject to strict manufacturing and quality control tests. Thanks to using the excellent quality components, these starters ensure long-life operation of up to 4 years and extend the lamp life by 20%. The case is made of Makrolon (self-extinguishing plastic) and meet the conditions laid down for protection class II.

Features and Benefits:

• DEOS® ST 171 SAFETY, DEOS® ST 172 SAFETY and DEOS® ST 173 SAFETY are safety starters
• DEOS® ST 172 SAFETY is a safety starter for series circuits (tandem circuits)
• DEOS® ST 171 SAFETY, DEOS® ST 172 SAFETY and DEOS® ST 173 SAFETY are designed to operate with conventional control gear (CCG) and low-loss gear (LLG)
• They reliably disconnect burnt-out or faulty lamps under inductive or capacitive operating conditions
• They are instantly ready for operation when the red button is pressed in (there must be an audible click)
• The automatic cutout circuit protects the choke and the starter itself
• Four times the life of conventional starters
• To ensure reliable ignition and operation the DEOS® ST should be replaced after every four lamp replacements.
• Temperature range for reliable cutout: -20°C…+80°C
• Extends the lamp life by 20%
• Self-extinguishing plastic casing made of Makrolon. Class V2
• Equipped with special radio-interference suppression capacitor (foil winding capacitor)
• Suitable for 220V-240V AC operation. 50/60 Hz, series circuit and single circuit 4W ...22W at 110V/127V

NOTE: To ensure reliable ignition we recommend that you also replace the starter when you replace the lamp. Starters cannot be used for OSRAM DULUX S/E, D/E, T/E or T/E IN lamps.

Approvals and Certification:

• ENEC 10 VDE
• Protection Class II

Typical Applications:

Lighting starters, also known as glow tube starters or tube light starters are devices designed to preheat the electrodes of fluorescent lamps and generate an ignition pulse. Fluorescent starters are an integral element of every fluorescent lighting set.

FAQs:

Can Fluorescent Lamps work without a starter?
No, Fluorescent lamps cannot work without a starter. A starter is required to generate an ignition pulse. Once that process is initiated, the ballast takes over providing sufficient voltage and regulating the current.

My brand new lamp fails to ignite but the starter switches without interruption. What causes the problem?
The lamp you installed probably doesn't ignite because of its wrong voltage. Please, check the lamp and replace with the correct voltage one if necessary. Also, if possible replace the starter.

Non-Series starter is rated at 230 V ac

Specificaties
Kenmerk Waarde
Type Electronic
Wattage 36 → 65 W
Voltage Rating 220 → 240 V ac
Number of Lamps 3
Number of Pins 2
160 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
165 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
6,248
(excl. BTW)
7,56
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
6,248 €
31,24 €
*prijsindicatie
Related Products
Compact non-isolated motor speed control modules for dc. ...
Description:
Compact non-isolated motor speed control modules for dc. shunt wound and permanent magnet field motors. DIN rail mountingSuitable for 110//120 or 220/240V single phase ac. supplies (switch selectable)Fully isolated heatsinkControl signals available for zero speed, drive health and speed trimAdjustable ...
PID controlCT InputLinear Voltage outputAdditional relay outputOne programmable ...
Description:
PID controlCT InputLinear Voltage outputAdditional relay outputOne programmable user inputOn-demand auto-tuning of PID settingsRS-485 communications1/16 DINW48 x H48 mm100 to 240 VAC -20/+8 %, 50/60 Hz, 5 VAProgrammed using Crimson® 2.1.
When body heat is detected, the load is ...
Description:
When body heat is detected, the load is switched on. At a preset time after movement has ceased the load is automatically switched off. Available for standard lighting or electrical appliance applications. A contemporary styled presence detector switchFits a single ...
The PHE844 Series is constructed of metallized polypropylene ...
Description:
The PHE844 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin. cULClass X1 Rated Voltage: 440 VAC 50/60 Hz,, 480VAC50/60 Hz (ULcUL)Capacitance range: 0.1 – 2.2 μF Lead spacing: 22.5 – 37.5 mmCapacitance tolerance: ±20%, ±10%Climatic category 40/105/56/BTape ...