RS PRO 32 W Electronic LED Lighting Ballast, 220 → 240 V
- RS-stocknr.:
- 796-1909
- Fabrikant:
- RS PRO
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 796-1909
- Fabrikant:
- RS PRO
Wetgeving en conformiteit
- Land van herkomst:
- IT
Productomschrijving
RS Dimmable Multipower LED Drivers
Direct current, dimmable, electronic drivers multi-voltage and multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. This range of dimmable electronic drivers can power both voltage LED strips and power current LEDs. This power supply delivers high power, with active PFC and flexible selection of the output current.
Multi-power driver supplied with dip-switch for the selection of the output current
Active Power Factor Corrector
Protections against overheating, short circuits, mains voltage spikes and overloads
Can be switched on and off on secondary circuit for power LED
Active Power Factor Corrector
Protections against overheating, short circuits, mains voltage spikes and overloads
Can be switched on and off on secondary circuit for power LED
Approvals
EN 50172 (VDE 0108)
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384
Specificaties
Kenmerk | Waarde |
|---|---|
| Wattage | 32 W |
| Ballast Type | Electronic |
| Supported Lamp Type | LED |
| Voltage Rating | 220 → 240 V |
| Dimmable | Yes |
| Length | 103 mm |
| Width | 67 mm |
| Height | 21mm |
| Minimum Operating Temperature | -25°C |
| Maximum Operating Temperature | +50°C |
| Dimming Protocol | DALI |
- RS-stocknr.:
- 796-1909
- Fabrikant:
- RS PRO