Lighting Cover for use with Unrolled wool insulation and mineral plate reinforcement, 592mm Width,592mm Length

  • RS-stocknr. 177-4545
  • Fabrikantnummer 148-00117 SPOTCLIP-PLATE 600-PA66HS-BK
  • Fabrikant HellermannTyton
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

The SpotClip-Plate provides a solution to the difficulty of installing downlights in suspended ceilings: it spreads the lamp load evenly in suspended ceilings and reinforces the mineral plates.

SpotClip-Plate can be used to ensure the safety distance between the
downlight and insulation material. We offer three different solutions to
prevent damage to insulation material caused by overheating of
the bulb: either by combining it with the SpotClip-Kit, or by combining it with 4 Spotclip-Caps and 4 rigid tubes or 2 SpotClip-Plate separated by rigid tubes.

This process also improves lamp lifespan and reliability.

Installation and bulb replacement is quick and easy. This solution can be used for both refurbishment and new construction.

The SpotClip-Plate is suitable for the most common downlight diameters from 75 to 314 mm. Simply cut the pins between the pre-cut areas with a hacksaw to obtain the desired diameter and allow the spotlight to be installed in the centre of the plate.

Specificaties
Kenmerk Waarde
For Use With Unrolled wool insulation and mineral plate reinforcement
Product Width 592mm
Product Length 592mm
Series SpotClip-Plate
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
23,91
(excl. BTW)
28,93
(incl. BTW)
Aantal stuks
Per stuk
1 +
23,91 €
Related Products
Moulded E14 lampholder suitable for screw-on, snap-in or ...
Description:
Moulded E14 lampholder suitable for screw-on, snap-in or push-in fixing. A suitable M10x1 threaded snap-on insulating cover is available 293-1108. Both cover and lampholder are required for operation.
Low voltage tungsten halogen spotlights with standard square ...
Description:
Low voltage tungsten halogen spotlights with standard square fitting base12V lamps with or without integral step down transformer24V lamps without step down transformerLamps have on/off switches in the baseA number of accessories are available to supplement installation applications.
This further development of SpotClip-II allows the use ...
Description:
This further development of SpotClip-II allows the use of an existing power supply. In the case of a spot without power supply, this added straight leg can be cut easily and removed manually. It helps to avoid contact between the ...
SpotClip-Kit has been designed for use primarily in ...
Description:
SpotClip-Kit has been designed for use primarily in industrial and office buildings for downlights with larger dimensions. The packaging kit consists of three legs and a mounting plate. SpotClip-Kit has six selectable fixing positions in the mounting plate, making it ...