Siemens Echomax XPS Series Level Ultrasonic

  • RS-stocknr. 804-4137
  • Fabrikantnummer 7ML1115-3CA30
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CA
Productomschrijving

Echomax XPS

Simens XPS series of ultrasonic transducers are suitable for both solid and liquid level measurement. Echomax transducers feature a narrow, highly sensitive beam with Siemens sonic intelligence (when used in conjunction with a Siemens transceiver) to provide accurate results without interference. Suitable for diverse range of mediums including solids, dusty solids, pellets, slurries and liquids.

PVDF, IP68 rated enclosure
Submergence detection (XPS-10 / XPS-15 )
44 kHz frequency (30 kHz XPS-30)
6° Beam angle (12° XPS-10)
Max range 10m (XPS-10), 15m (XPS-15), 30m (XPS-30)
Internal temperature compensation
Self cleaning
Suitable for use indoors and outdoors

Note

A submergence shield is required for submergence detection

Specificaties
Kenmerk Waarde
Device Type Ultrasonic
Minimum Operating Temperature -20°C
Maximum Operating Temperature +95°C
Series Echomax XPS
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
540,00
(excl. BTW)
653,40
(incl. BTW)
Aantal stuks
Per stuk
1 +
540,00 €
Related Products
A general purpose ultrasonic level sensor with an ...
Description:
A general purpose ultrasonic level sensor with an integrated level controller. The unit is equipped with 3 programmable relays and a 4 to 20 mA output and is easy to program using the built-in push button display module. The relays ...
Premium range of CSA approved intrinsically safe ultrasonic ...
Description:
Premium range of CSA approved intrinsically safe ultrasonic level point switches from Flowline offer a reliable sensing solution within chemical, solvent, hydrocarbon & petroleum based liquids. Thanks to the universally mounting style of the Switch-Tek series they can be used ...
The product family UP56 of ultrasonic level sensors ...
Description:
The product family UP56 of ultrasonic level sensors is the ideal solution for demanding applications. The teflon-protected transducer handles overpres-sure up to 6 bar (87 psi) and is resistant against numerous difficult fluids. Wetted parts can be chosen either as ...
Used for measuring the level of conductive liquids ...
Description:
Used for measuring the level of conductive liquids i.e. maximum, minimum control of charging or discharging. The function is determined by the type of amplifier relay usedStainless steel electrodeNylon 6 housing materialFitted with a 2m PVC cable.