Sick Chassis Mount Level Sensor NPN Output

  • RS-stocknr. 793-2816
  • Fabrikantnummer MHF15-21NG1NSM
  • Fabrikant Sick
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: HU
Productomschrijving

MHF15 Optical Point Level Switch

A range of easy to install level sensors requiring no calibration and suitable for installation in confined or difficult to access areas. SICK's MFH15 series of optical level switches are robust and simple in construction and manufactured from stainless steel and polysulfone with a casing rated to IP 67. Optical Level sensors operate using a LED light and the principle of refraction. The level sensor emits a beam of light from the LED which is directed via a prism at the tip of the sensor to a receiver unit. When the level detectors prism is immersed in liquid the emitted light is lost to the surrounding liquid and triggers a response.Ideally suited to level monitoring of fluids and water based media and suitable for applications such as pipe leak detection and level detection in industrial, pharmaceutical and food manufacturing systems and dry running protection.

No calibration required
IP 67, IP 69K rated enclosure
2 ms response time
250 Hz switching frequency
Choice of PNP or NPN output
Stainless steel casing
M12 4 pin connection
FDA Compliant

Note

These sensors cannot detect low density foams.
Use with high density foams may lead to incorrect operation.

//media.rs-online.com/t_line/L7932812-01.jpg
Specificaties
Kenmerk Waarde
Device Type Optical Sensor
Mounting Type Chassis Mount
Switch Output NPN
Body Material Stainless Steel
Minimum Operating Temperature -25°C
Maximum Operating Temperature +55°C
Maximum Current 100 mA
Maximum Pressure 16bar
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
The Mobrey ultrasonic liquid level switch with polyphenylene ...
Description:
The Mobrey ultrasonic liquid level switch with polyphenylene sulphide construction has output type integral SPCO relay (energised when the sensor is wet) and 1-in BSPT dual mount thread. This switch is designed for high or low-level alarm duties to give ...
CE marked in compliance with relevant European Directives. ...
Description:
CE marked in compliance with relevant European Directives. Sensing range 2 to 10mm adjustable via a single turn potentiometerLED indication when activatedOutput: DC 100mA transistorPower ON delay; Max 40ms (No delay version), Max 5s (ON/OFF delay versions)Supply voltage; 5-30VdcNo load ...
Designed for use in harsh industrial environments with ...
Description:
Designed for use in harsh industrial environments with extremes in temperature, pressure, vibration or shockHoused in a stainless steel body with polysulphone dome LED and Optoschmitt ouputEasy to cleanIngress protection to IP67User defined single point on/off switchHysteresis 1mm depending on ...
The Vega vibrating rod level switch has a ...
Description:
The Vega vibrating rod level switch has a relay (DPDT), contactless electronic switch, two-wire output. It detects reliably and accurately the minimum or maximum limit level. The smooth surface of the vibrating rod, without corners and edges, avoids jamming of ...