Sick LFV200 Series Level Switch PNP Output IO-Link

  • RS-stocknr. 175-5058
  • Fabrikantnummer LFV200-XXHCLIPM
  • Fabrikant Sick
Wetgeving en conformiteit
Land van herkomst: DE

The LFV200 product family of universal vibrating level switches precisely detects predefined liquid levels in systems to the millimeter. The switches can emit a signal to prevent overfilling, a switching signal for refilling, or a dry-run signal for pump protection. The LFV200 works independently of the liquid and is wear-free and maintenance-free. The rugged stainless steel tuning fork is piezo-electrically energized and vibrates at its resonance frequency.

Housing made of 316L stainless steel
Two electrical output versions and IO-Link available
Commissioning without filling
Process temperature up to 150 °C
Immune to deposit formation
Very high repeatability
Aseptic versions with polished surface, CIP and SIP resistant
Tube extension up to 1,200 mm
Easy installation and commissioning, no pre-calibration necessary
Easy operation and integration
Maintenance-free system
Sensors can be tested while installed
Flexible, reliable system suitable for many types of applications

Kenmerk Waarde
Device Type Vibrating Level Switch
Mounting Type 1.5” Triclamp Thread
Switch Output PNP
Body Material PEI, Stainless Steel 1.4404
Communication Protocol IO-LINK
Minimum Operating Temperature -40°C
Maximum Operating Temperature +70°C
Maximum DC Voltage 30V
Maximum Current 250 mA
Maximum Pressure 64bar
Standards Met CE Certified
Series LFV200
Interface IO-Link
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
378,00 €
Related Products
The Cynergy3 liquid level sensor is designed for ...
The Cynergy3 liquid level sensor is designed for single point level detection. This sensor has an infrared emitter and detector, aligned within an accurately shaped cone to give good optical coupling when the sensor is in the air. This coupling ...
A range of easy to install level sensors ...
A range of easy to install level sensors requiring no calibration and suitable for installation in confined or difficult to access areas. SICK's MFH15 series of optical level switches are robust and simple in construction and manufactured from stainless steel ...
A range of guided radar level detection units ...
A range of guided radar level detection units from SICK. Using TDR (time domain reflectrometry), time of flight technology these level sensors use contact type level measurement to detect and monitor levels in both water and oil based fluids. Offering ...
From 08B to 16BPins and plates in stainless ...
From 08B to 16BPins and plates in stainless steel series 300Solid bushes in stainless steel series 300Extruded rollers in stainless steel series 300Other chains of the range :Articulations and plates in Stainless steel series 300Solid rollers in stainless steel series ...