Omron PS3S Electrode Holder, For Use With 3 Pole Electrode

  • RS-stocknr. 354-307
  • Fabrikantnummer PS3S
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

Omron Electrode Holder

The Omron three-pole electrode holder allows the electrode to be withdrawn easily for inspection. It is a 3-way terminal box with screw-in electrode connections and Snap-On cover with grommeted entry. This device is a small and lightweight electrode holder that is suitable for installation in limited space and built-in components.

Features and Benefits

BSP fitting is 2in
Material is resin (PBT = Polybutylene terephthalate)
Insulation resistance is 100Mohm minutes
Operating temperature ranges between −10°C and 70°C (with no icing)
Operating pressure is in atmospheric pressure

Applications

Water supply and drainage control in buildings
Industrial use

Specificaties
Kenmerk Waarde
Accessory Type Electrode Holder
For Use With 3 Pole Electrode
26 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
60 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
27,24
(excl. BTW)
32,96
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
27,24 €
5 - 9
26,49 €
10 +
25,77 €
Related Products
The multifunction preset counter 571T with its max. ...
Description:
The multifunction preset counter 571T with its max. 250 kHz count frequency is ideal for fast counting tasks. It can also be used as a tachometer, short time meter, stop-watch or to measure machine cycle times or throughput times. Fast ...
The Vega display and adjustment module are used ...
Description:
The Vega display and adjustment module are used to measure value indication and adjustment of plics sensors. It is mounted in the respective sensor housing. On instruments with double chamber housing, this module can be mounted either in the electronics ...
Conveniently supplied in bags of 10 of each ...
Description:
Conveniently supplied in bags of 10 of each seal type, these original Cynergy3 brand float switch seals and washers can be used to replace lost or damaged seals and washers. Packs of 10 replacement sealsUse to replace missing or damaged ...
Alarm or pump control for controlling between two ...
Description:
Alarm or pump control for controlling between two levels 3 electrode holdersModes: max detection, overfill (A) or min detection dry run protection (B)External LED switch status3 electrode holdersSelectable sensitivity; 100Ω to 300kΩIntegration time adjustable up to 20 secs1m x 4mm ...