Flowline LI55 Series Level Controller -, 85 265 V ac Input

  • RS-stocknr. 889-1532
  • Fabrikantnummer LI55-1011
  • Fabrikant Flowline
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: US
Productomschrijving

Flowline DataView™ Level Controller

Flowline's general purpose range of level controller displays which cover an assortment of engineering units. Comes equipped with either a 4-20mA or 0-10mA level sensor inputs, with various configurations to ensure your application is covered. Optional 2 or 4 programmable relays & repeater are available for added functionality

Features and Benefits

Intuitive setup system allows for simple configuration and range adjustment, reducing downtime
Password protected non-volatile memory for secure parameters
Direct control of pumps, valves and alarms can be achieved via an additional 2 or 4 relay
An assortment of units can be displayed on the 6 digit LED display, such as gallons, litres, inches, feet, meters & liquid remainder percentage

Flowline Sensors

Specificaties
Kenmerk Waarde
Supply Voltage 85 265 V ac
Minimum Operating Temperature -40°C
Maximum Operating Temperature +60°C
Series LI55
Current Rating 3 A
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04/05/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
673,47
(excl. BTW)
814,90
(incl. BTW)
Aantal stuks
Per stuk
1 +
673,47 €
Related Products
The K7L-AT50 liquid leakage sensor amplifier by Omron ...
Description:
The K7L-AT50 liquid leakage sensor amplifier by Omron can detect a wide variety of liquids ranging from water to chemicals with low conductivity. It internally oscillates AC signals provided to the Sensing Band, protecting it from electric corrosion and ensuring ...
Liquid Level Relays are used to monitor the ...
Description:
Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use. Compact units for single or two-point level ...
Facilitates low-interference transmission of the sensor signal from ...
Description:
Facilitates low-interference transmission of the sensor signal from a combination electrode across large distancesRecommended from a lead length of approx. 15 mEasy assembly between combination electrode and connection cable for pH and redox electrodesMains-independent operation.
Accepts any 4 to 20mA or HART compatible ...
Description:
Accepts any 4 to 20mA or HART compatible inputSupply voltage115/240Vac with Intrinsically safe 24Vdc power supply to the transmitterTwo voltage free contact closure inputsPre-programmed tank shapes, flow algorithms and pump control routinesTwenty-point set up facility for non-standard applications.Real time ...