ABB Liquid Level Relay - DIN Rail Mount, Screw Mount, Snap-On, 220 240 V ac Input

  • RS-stocknr. 746-7466
  • Fabrikantnummer 1SVR430851R1300
  • Fabrikant ABB
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Max/Min Liquid Level Relay - ABB CM-ENS

Maximum/Minimum Liquid Level Relays are suitable for a number of applications including fill and drain monitoring of tanks. Single-pole electrodes sense a change in resistance, energising the circuit if the liquid exceeds the maximum level, and de-energising if the liquid level drops below the minimum level.

Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use.

Application Examples

Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the:

Monitoring and control of liquid levels
Protection of pumps against dry running
Ability to detect liquid leaks in a system
Control of media mixing ratios
Control of liquid levels

Specificaties
Kenmerk Waarde
Mounting Style DIN Rail Mount, Screw Mount, Snap-On
Probe Voltage 30V ac
Supply Voltage 220 240 V ac
Overall Length 109.5mm
Overall Width 22.5mm
Overall Depth 78mm
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
Flow switch series from Cynergy3. These flow switches ...
Description:
Flow switch series from Cynergy3. These flow switches are reed switch based and can monitor the flow of liquids up to 10bar in pressure. This series of flow switches can be mounted horizontally or vertically and have minimal flow restriction. ...
A series of liquid level control relays from ...
Description:
A series of liquid level control relays from ABB for conductive liquids. The CM-ENS range gives a choice of 3 variants each with a compact, space saving housing with the highest fire protection and environmentally friendly materials. Installation is quick ...
Accepts any 4 to 20mA or HART compatible ...
Description:
Accepts any 4 to 20mA or HART compatible inputSupply voltage115/240Vac with Intrinsically safe 24Vdc power supply to the transmitterTwo voltage free contact closure inputsPre-programmed tank shapes, flow algorithms and pump control routinesTwenty-point set up facility for non-standard applications.Real time ...
Liquid Level Relays are used to monitor the ...
Description:
Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use. Dual voltage sensing relay 115/230V ACSingle or ...