Level Controller - Panel Mount 115 → 230 V ac 2 Input

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Level Sensing Relay

Dual voltage sensing relay 115/230V AC
Single or two point level control
Selectable 'Pump-up' or 'Pump-down' modes
Variable sensitivity; 2kΩ on, 5kΩ off, to 20kΩ on, 50kΩ off
LED indication of relay and supply status
Panel cutout (mm): 45 x 45
Single point level; relay energises (Pump-up) / de-energises (Pump-down) when liquid level drops below the set level electrode
Two point level; relay energises when liquid level drops below low level electrode and de-energises when level reaches high level electrode (Pump-up)
Relay de-energises when liquid level drops below low level electrode and energises when level reaches high level electrode (Pump-down)

//media.rs-online.com/t_line/L346609-01.gif

Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use.

Application Examples

Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the:

Monitoring and control of liquid levels
Protection of pumps against dry running
Ability to detect liquid leaks in a system
Control of media mixing ratios
Control of liquid levels

Specificaties
Kenmerk Waarde
Number of Inputs 2
Mounting Style Panel Mount
Probe Voltage 17V ac
Supply Voltage 115 V ac, 230 V ac
Overall Length 75mm
Overall Width 48mm
Overall Depth 48mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
16 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
88,19
(excl. BTW)
106,71
(incl. BTW)
Aantal stuks
Per stuk
1 +
88,19 €
Related Products
A series of liquid level control relays from ...
Description:
A series of liquid level control relays from ABB for conductive liquids. The CM-ENS range gives a choice of 3 variants each with a compact, space saving housing with the highest fire protection and environmentally friendly materials. Installation is quick ...
The K7L-AT50 liquid leakage sensor amplifier by Omron ...
Description:
The K7L-AT50 liquid leakage sensor amplifier by Omron can detect a wide variety of liquids ranging from water to chemicals with low conductivity. It internally oscillates AC signals provided to the Sensing Band, protecting it from electric corrosion and ensuring ...
Facilitates low-interference transmission of the sensor signal from ...
Description:
Facilitates low-interference transmission of the sensor signal from a combination electrode across large distancesRecommended from a lead length of approx. 15 mEasy assembly between combination electrode and connection cable for pH and redox electrodesMains-independent operation.
Fully Automatic operation enabling both draining and filling ...
Description:
Fully Automatic operation enabling both draining and filling at the same time with a single device Protects submersible pumps against dry running and prevents overfilling Enables maximum utilization of incoming liquid supply Specially designed corrosion and shock resistant sensors to ...