Brodersen Controls Level Relay - DIN Rail Mount, 115 V ac, 24 V ac 2 Input

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DK
Productomschrijving

MXL-10 Level Relays

Monitoring / control level relay for conductive fluids. With a two or three wire probe, one or two levels in a container can be controlled
Signal at maximum and minimum levels
Sensitivity adjustable on input 5 to 50kΩ
Response time adjustable from 0.1 to 5 seconds
Ambient temperature; -20 to +55°C
Automatic locking (latch)
LED supply and output indications
35mm DIN rail mounting
W22.5 x H80 x D104mm
Protection IP 20

Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use.

Application Examples

Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the:

Monitoring and control of liquid levels
Protection of pumps against dry running
Ability to detect liquid leaks in a system
Control of media mixing ratios
Control of liquid levels

Specificaties
Kenmerk Waarde
Number of Inputs 2
Mounting Style DIN Rail Mount
Probe Voltage 12V ac
Supply Voltage 24 V ac, 115 V ac
Overall Length 104mm
Overall Width 22.5mm
Overall Depth 80mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +55°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 20/01/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
100,82
(excl. BTW)
121,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
100,82 €
Related Products
The SIRIUS 3TX7 narrow design interface relays are ...
Description:
The SIRIUS 3TX7 narrow design interface relays are coupling elements used to connect control signals to and from a PLC. Coupling device (interface) as a connector moduleControl and peripheral motor protectionEquipment: DIN VDE 0110, DIN VDE 0435, DIN VDE 0660 ...
A series of liquid level control relays from ...
Description:
A series of liquid level control relays from ABB for conductive liquids. The CM-ENS range gives a choice of 3 variants each with a compact, space saving housing with the highest fire protection and environmentally friendly materials. Installation is quick ...
Maximum/Minimum Liquid Level Relays are suitable for a ...
Description:
Maximum/Minimum Liquid Level Relays are suitable for a number of applications including fill and drain monitoring of tanks. Single-pole electrodes sense a change in resistance, energising the circuit if the liquid exceeds the maximum level, and de-energising if the liquid ...
Often used to monitor liquid levels in pump ...
Description:
Often used to monitor liquid levels in pump control systems and dry running protection for submersible pumps, Fill/Empty Level Liquid Relays measuring principle is based on a change in resistance sensed by single-pole electrodes. Measuring, output and supply circuits are ...