RS PRO Red LED Indicator Lamp, 24V ac/dc, E10 Base, 10mm Diameter, 110/105mcd
- RS-stocknr.:
- 210-260
- Fabrikant:
- RS PRO
83 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 8,84
(excl. BTW)
€ 10,70
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 24 | € 8,84 |
| 25 - 49 | € 7,84 |
| 50 - 99 | € 6,95 |
| 100 - 249 | € 6,03 |
| 250 + | € 5,14 |
- RS-stocknr.:
- 210-260
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
E10 MES, ac/dc, Multi-Chip LEDs
High brightness multi-chip LED
LED lamps contain 8 LED chips and a bridge and current limiting resistor
Satin chrome reflector
Suitable for connection to either ac or dc supplies. When using a dc supply, positive to be connected to the base contact
LED lamps contain 8 LED chips and a bridge and current limiting resistor
Satin chrome reflector
Suitable for connection to either ac or dc supplies. When using a dc supply, positive to be connected to the base contact
Multi-Chip LEDs
Multi-chip LEDs are semi-conducting alternatives to incandescent filament lamps. Construction consists of standard filament lamp bases incorporating a current limiting resistor and a cluster of LED chips bonded onto a substrate. Multi-chip LEDs have many advantages over standard filament lamps.
Very high immunity to shock and vibration
Current consumption is between 50 and 65% lower
Lower operating temperatures
Current consumption is between 50 and 65% lower
Lower operating temperatures
Note
The operating voltage must not be exceeded by more than 10% as this will result in reduced life expectancy.
Specificaties
Kenmerk | Waarde |
|---|---|
| Voltage Rating | 24V ac/dc |
| Light Output Colour | Red |
| Lamp Type | LED |
| Intensity | 110/105mcd |
| Lamp Base | E10 |
| Chip Type | Multichip |
| Diameter | 10mm |
| Length | 28mm |
| Viewing Angle | 180 ° |
| Peak Wavelength | 630nm |
| Life Hours | 100000h |