STEVAL-ILL088V1, LED Evaluation Kits

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

The STEVAL-ILL088V1 evaluation board is based on a monolithic current source for high power LED driving, the LED6000, a 61 V asynchronous switching regulator. With embedded power MOSFET, it is designed to source up to 3 A DC current depending on the application conditions. The 250 mV typical RSENSE voltage drop, the VBIAS pin embedded switch-over feature and the light load management (pulse skipping) maximize power conversion efficiency across the entire load range. Digital dimming is implemented by driving the dedicated DIM pin. The current limit threshold and the switching frequency are adjustable for application optimization. The device also includes a 250 kHz oscillator that can be externally adjusted up to 1.5 MHz. The size of the overall application is minimized thanks to the high switching frequency and its compatibility with ceramic output capacitors. Two LED6000 regulators can be synchronized in a 180° out-of-phase configuration to reduce the total input RMS current.

Specificaties
Kenmerk Waarde
LED Technology LED Driver
Kit Classification Evaluation Board
For Use With High Power LED
Featured Device LED6000
Kit Name STEVAL
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
31,05
(excl. BTW)
37,57
(incl. BTW)
Aantal stuks
Per stuk
1 +
31,05 €
Related Products
The ON Semiconductor is a single chip, dual-LED ...
Description:
The ON Semiconductor is a single chip, dual-LED ballast shield power management Arduino evaluation board. The dual LED driver designed for high current LEDs that provides a complete solution to drive two strings up to 60V, utilizing two internal independent ...
The B-G474E-DPOW1 Discovery kit is a digital power ...
Description:
The B-G474E-DPOW1 Discovery kit is a digital power solution and a complete demonstration and development platform for the STMicroelectronics STM32G474RET6 microcontroller. Leveraging the new HRTimer-oriented features, 96 Kbytes of embedded RAM, math accelerator functions and USBPD 3.0 offered by STM32G474RET6, ...
This demonstration board provides a complete solution for ...
Description:
This demonstration board provides a complete solution for driving 40 high-brightness green LEDs manufactured by Toshiba. The high-brightness LEDs are arranged on the board in a 5x8 matrix. The matrix is driven by five 8-channel STP08DP05 drivers which are controlled ...
The STEVAL-ILL015V2 product evaluation board provides a platform ...
Description:
The STEVAL-ILL015V2 product evaluation board provides a platform to test and evaluate the power logic LED driver LED2472G from STMicroelectronics. The LED2472G is a 24-bit constant-current LED sink driver with output error detection, suitable for applications such as large-area displays ...