STMicroelectronics STEVAL-ILL015V2, STEVAL LED Driver Evaluation Board for LED2472G, STM32 for Microcontroller

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

The STEVAL-ILL015V2 product evaluation board provides a platform to test and evaluate the power logic LED driver LED2472G from STMicroelectronics. The LED2472G is a 24-bit constant-current LED sink driver with output error detection, suitable for applications such as large-area displays and full-color board panels where improvement in RGB LED resolution and reduction of system cost are important.

Specificaties
Kenmerk Waarde
LED Technology LED Driver
Kit Classification Evaluation Board
For Use With Microcontroller
Featured Device LED2472G, STM32
Kit Name STEVAL
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30/10/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
80,54
(excl. BTW)
97,45
(incl. BTW)
Aantal stuks
Per stuk
1 +
80,54 €
Related Products
The VM810C is a development module for the ...
Description:
The VM810C is a development module for the FTDI FT810 graphics engine device. It supports any LCD panel that meets the FT810 technical specification and fits the VM810C display connector. FT810 EVE2 Embedded Graphics Engine device40-way Flex-Cable connector for LCD ...
The MCP1630 Boost Mode LED Driver Demo Board ...
Description:
The MCP1630 Boost Mode LED Driver Demo Board is a step-up, switch-mode, dc-dc converter used for power LED applications. The demo board provides a 350mA or 700mA constant current source with jumper selection. The operating supply is 9Vdc to 16Vdc ...
The EVALLED-ICL8002G-B2 is an evaluation board for dimmable ...
Description:
The EVALLED-ICL8002G-B2 is an evaluation board for dimmable 12 W LED bulb in non-isolated buck topology. The demo board high compatibility with a wide range of dimmers has been accomplished by adding damping and bleeding circuit blocks. The output current ...
The EVALLED-ICL8002G-B3 is demo board for dimmable 20 ...
Description:
The EVALLED-ICL8002G-B3 is demo board for dimmable 20 W LED PAR38 in isolated flyback topology. It is designed for high efficiency, high-power factor, low THD and isolation. The primary side control with the integrated PFC and phase-cut dimming control makes ...