30-5V Converter 14mm Leads + Jack Plug

  • RS-stocknr. 127-1574
  • Fabrikantnummer 5078-14-000
  • Fabrikant Global Laser
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

30V to 5V DC Converter PSU

An in-line DC-DC converter from Global Laser which will provide a regulated 5V DC output from an input of 6 to 30V DC. The unit is enclosed in a robust, compact aluminium housing and is ideal for use with the standard 24V DC supplies found in industrial environments.

• Input voltage: 6 to 30V DC
• Input connection: 500 mm long flying leads
• Output voltage: 5V DC @ 150mA
• Output connection: 2.5mm female DC Power Jack
• Dimensions: 14mm diameter x 48mm long
• Electrically isolated case
• Reverse polarity protected
• Operating temperature range: -10 to +50°C

31 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
76,33
(excl. BTW)
92,36
(incl. BTW)
Aantal stuks
Per stuk
1 - 1
76,33 €
2 - 4
69,53 €
5 - 9
63,74 €
10 - 24
58,83 €
25 +
54,63 €
Related Products
The New 30Watt NP Series from EOS are ...
Description:
The New 30Watt NP Series from EOS are ideal for portable computing, multimedia, industrial, networking, printing and battery charging applications. The new NP series of power adapters are fully compliant with CEC and Energy StarIV requirements and provide their full ...
Description:
The DG2592 is an audio jack detector and pop noise control switch IC. It integrates the circuits necessary to detect the presence of a stereo headset with a microphone and send / end control button. When there is no ear ...
Miniature plugs suitable for powering portable radios, calculators ...
Description:
Miniature plugs suitable for powering portable radios, calculators plus test and measurement instruments from a fixed, low-voltage d.c. source. Chassis mounting sockets for the 2.1mm plugs and adaptor leads terminated with 2.1mm and 2.5mm plugs and sockets are also available. ...
Switchcraft 2 conductor DC power plugs with a ...
Description:
Switchcraft 2 conductor DC power plugs with a hollow centre pin and molded plastic covers for use with 2.1mm and 2.5mm Jacks. The sleeve terminal also serves as a cable clamp. Available in red or black cover versions and in ...