Fluke Networks Permanent Link Adapters Set for DSX-5000 Cable Analyser

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

A Cat 6 Self Test will help to determine if you have faulty DSX-PLA004 Permanent Link or DSX-CHA004 Channel Adapters

If you receive failures when testing, there is the possibility of a faulty DSX-PLA004 Permanent Link Adapter. You could also have a faulty DSX-CHA004 Channel Adapter if you were carrying out Channel testing too

Insert the DSX-5000 CableAnalyzer modules into the main frames.
Power up the main and remote units.
Plug in a DSX-PLA004 Permanent Link Adapter into the DSX module on the Versiv/TFS main unit. (The one with the LCD)
Plug in a DSX-CHA004 Channel Adapters into the other DSX module, and connect the adapters directly together as shown below

Specificaties
Kenmerk Waarde
Accessory Type Permanent Link Adapters Set
For Use With DSX-5000 Cable Analyser
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1.021,00
(excl. BTW)
1.235,41
(incl. BTW)
Aantal stuks
Per stuk
1 +
1.021,00 €
Related Products
The RS Pro Coax Mapper is design for ...
Description:
The RS Pro Coax Mapper is design for CATV and Security system Coax cable with F- connectors. It can use four colour coded ID to locate and identify multiple coax cables splitters. It also has the tone function which create ...
This LAN cable tester probe from our trusted ...
Description:
This LAN cable tester probe from our trusted and reliable own brand RS PRO is a high quality device ideal for identifying and tracing wires or cables within a group or bundle without causing damage to the insulation. This professional ...
The Molex Brad Harsh I/O Digital Ethernet module ...
Description:
The Molex Brad Harsh I/O Digital Ethernet module for Modbus TCP, Classic 60mm, 8 Ports M12 and 16 Universal. It has a user configuration of input/output connectors and 5-pole power. They are used as a tester for cables and Ethernet ...
The Molex network interface has SST DN4 High-Speed ...
Description:
The Molex network interface has SST DN4 High-Speed USB adapter for DeviceNet Master/slave. It has 5-pin to 312 sealed Micro-connector-DLL-Control. • Operating temperature ranges from 0°C and 60°C• I/O control.