CH Products, 3 Way Joystick Switch Knob, Hall Effect, 5V dc

  • RS-stocknr. 765-1157
  • Fabrikantnummer 100-650
  • Fabrikant CH Products
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

CH Products IPD Ultima USB Desktop Controller

Functions

The IP Desktop joystick has 3 axis movement for X, Y and Z positioning control. The X and Y-axis control pan and tilt while the Z-axis controls zoom. All three axes are sprung to centre and give a smooth, durable feel. The X and Y axis gives 36° of travel (18° off centre) and the Z axis gives 60° of travel (30° off centre).

The top of the joystick has 2 tactile push buttons that are positioned perfectly for thumb or finger actuation. The base of the joystick has ten LED illuminated tactile push buttons. All the push buttons are programmable giving you full control for various applications.

Power and Connectivity

This unit connects via USB making instillation quick and simple. It is supplied with a USB type A connection on a 2m cable. There is no need for complex wiring, helping to reduce instillation time and maintenance costs. Power is supplied directly from the USB connection eliminating the need for a dedicated PSU, again helping to reduce costs even further.

Features

Three axis Hall effect Joystick
Desktop housing features ten programmable buttons
Push button life cycle: 10 000 000 cycles
Operating temperature range: -25°C to +85°C

General Overview

A pan-tilt-zoom (PTZ) camera is regarded as the standard for security and surveillance systems. A PTZ controller is required to operate all functions of the camera. As it is widely used, they are easier to set up than other devices. The APEM IP Desktop joystick is compatible with a wide variety of operating systems, including Windows (multiple platforms), OSX and Linux. It uses standard DirectX HID drivers allowing it to connect directly to a workstation PC.

Specificaties
Kenmerk Waarde
Number of Axes 3
Switch Technology Hall Effect
Handle Type Knob
Contact Voltage Rating 5V dc
Contact Current Rating 300 mA
Contact Material Stainless Steel
Joystick Travel 36 (X and Y Axes) °, 60 (Z Axis) °
Mechanical Life 3000000Cycles
Depth Behind Panel 48.77mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +85°C
Operating Temperature Range -25 → +85°C
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
566,15
(excl. BTW)
685,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
566,15 €
Related Products
The HTWM offers the same performance as the ...
Description:
The HTWM offers the same performance as the HTW proportional thumbwheel but with a much shorter behind panel depth. Available with four output options, the HTWM offers a self-centre, single axis thumbwheel actuator that provides linear change in voltage output ...
The ZF 2 way momentary joystick knob is ...
Description:
The ZF 2 way momentary joystick knob is force operated and has precision fingertip or thumb control which converts the input force of the operator to an analogue output voltage proportional to the applied force and input voltage. It incorporates ...
The XD Series joystick is a multi-axis Hand ...
Description:
The XD Series joystick is a multi-axis Hand Grip controller specifically engineered for demanding vehicle applications. Featuring non-contacting Hall effect technology to provide up to 10 million operations, the XD series is a compact yet highly reliable joystick ideally suited ...
This APEM 7000 series inductive joystick is robust ...
Description:
This APEM 7000 series inductive joystick is robust and features a high degree of environmental protection. Employing a contactless, inductive sensing system, the 7000 series inductive joystick is ideal for conditions where a long service life and fail-tosafe are required. ...