Phoenix Contact VARIOFACE Series DIN Rail Interface Relay Module, DPDT

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

A PLC interface relay module designed to be mountable on DIN rail NS 35/7.5. Featuring a basic terminal block (PLC-BSP) with a spring cage connection and a pluggable miniature relay with power contact.

Phoenix Contact PLC-RSP Relays Series

This range of compact PLC relays from Phoenix Contact gives you a great choice of easy connection technology. The electromechanical relays act as the interface between your automation equipment and system peripherals.

Features and Benefits:

• Efficient connection to system cabling with V8 adapter
• Functional plug-in bridges
• Cost-effective
• Use the same electromechanical relay module design for both AC and DC switching voltage
• DIN rail mounting
• DPDT models available
• DC input versions feature a yellow LED for operating voltage
• AC input versions feature a yellow LED and bridge rectifier
• Free-wheeling diode Damping diode
• Dimensions 94 x 14 x 80 mm

Typical Applications:

The PLC relays are used in many different applications not limited to power amplification, electrical isolation or for using for voltage adjustment of frequency varying voltage levels.

Specificaties
Kenmerk Waarde
Switching Current 1 A
Contact Configuration DPDT
Mounting Type DIN Rail
Length 80mm
Depth 14mm
Series PLC-RSP- 24DC/21-21
Height 94mm
Dimensions 80 x 14 x 94mm
Input Current 18mA
Operating Temperature Range -25 → +60°C
Input Resistance 1.33kΩ
Maximum Operating Temperature +60°C
Minimum Operating Temperature -25°C
10 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
16,88
(excl. BTW)
20,42
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
16,88 €
5 - 9
16,36 €
10 +
15,83 €
Related Products
For use where isolated output drive is required ...
Description:
For use where isolated output drive is required e.g. motors, lamps, heaters, solenoids, etc. Modules provide the complete output interface function incorporating optical isolation with power drive components. ac modules use zero voltage switching for low noise operation, a dc ...
DIN rail mounting and only 6.2mm wideReplaceable relayJumper ...
Description:
DIN rail mounting and only 6.2mm wideReplaceable relayJumper combStatus LEDMarking facilityAvailable as high load silver contacts '0' and Gold Flashed low current '1'
ABB R600 series interface relays are used for ...
Description:
ABB R600 series interface relays are used for electrical isolation, amplification and signal matching between a PLC, PC or field bus system and the sensor/actuator level. The compact design and different connection terminal possibilities optimise your panel installation. Screw or ...
A range of Schneider Electric interface relays from ...
Description:
A range of Schneider Electric interface relays from the Zelio series. These plug in Relays are suitable for standard applications. Simple installation and operationContacts material silver alloy (Ag/Ni)DC or AC coilOperating temperature -40 → 70 °CIngress protection IP40.