Phoenix Contact VARIOFACE Series DIN Rail Interface Relay Module, DPDT, Screw

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

An interface relay module equipped with a universal foot and snap-fit on to the most common, G and omega type DIN profiles.

Phoenix Contact VARIOFACE/F Relays Series

This range of relays from Phoenix Contact gives you a great choice of easy connection technology. The electromechanical relays act as the interface between your automation equipment and system peripherals. These interfaces are able to accept 8 or 16 electro-mechanical relays with 1 changeover and are supplied fitted with 8 or 16 relays or optocouplers.

Features and Benefits:

• Saves space on the DIN rail
• Individual labelling available with Phoenix contact marking system
• Cost-effective
• LED indicates the status of the relay
• Interface inputs designed for ac or dc supply
• Screw connections
• For conductors up to 2.5mm2
• Replacement relays available separately

Typical Applications:

The PLC relays are used in many different applications not limited to power amplification, electrical isolation or for using for voltage adjustment of frequency varying voltage levels.

VARIOFACE/F-SO4751 5903584

Specificaties
Kenmerk Waarde
Coil Voltage 24V dc
Maximum Input Voltage 24V dc
Contact Configuration DPDT
Switching Current 1 A
Mounting Type DIN Rail
Terminal Type Screw
Series VARIOFACE/F-SO4751
Number of Poles 2
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
328,38
(excl. BTW)
397,34
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
328,38 €
5 - 9
318,34 €
10 +
308,03 €
Related Products
For use where isolated output drive is required ...
Description:
For use where isolated output drive is required e.g. motors, lamps, heaters, solenoids, etc. Modules provide the complete output interface function incorporating optical isolation with power drive components. ac modules use zero voltage switching for low noise operation, a dc ...
ABB R600 series interface relays are used for ...
Description:
ABB R600 series interface relays are used for electrical isolation, amplification and signal matching between a PLC, PC or field bus system and the sensor/actuator level. The compact design and different connection terminal possibilities optimise your panel installation. Screw or ...
A range of Schneider Electric interface relays from ...
Description:
A range of Schneider Electric interface relays from the Zelio series. These plug in Relays are suitable for standard applications. Simple installation and operationContacts material silver alloy (Ag/Ni)DC or AC coilOperating temperature -40 → 70 °CIngress protection IP40.
The CR-P series of pluggable interface relays from ...
Description:
The CR-P series of pluggable interface relays from ABB are standard PCB relays that can be used for electrical isolation, amplification and signal matching between the electronic controlling, e.g. PLC (programmable logic controller), PC or field bus systems and the ...