Phoenix Contact PLC-RSC Series 24V dc DIN Rail Interface Relay Module, DPDT, Screw

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

PLC-RSC- 24DC/21-21/EX 2909509

PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with power contact, 2 changeover contacts, 24 V DC input voltage.

Specificaties
Kenmerk Waarde
Coil Voltage 24V dc
Maximum Input Voltage 24V dc
Switching Current 10 mA
Contact Configuration DPDT
Mounting Type DIN Rail
Switching Voltage 250V ac/dc
Terminal Type Screw
Length 14mm
Series PLC-RSC- 24DC/21-21/EX
Depth 94mm
Height 80mm
Dimensions 14 x 94 x 80mm
Contact Material Silver Alloy
Input Current 18mA
Relay Switching Classification Interface Relay Module
Number of Poles 2
Operating Temperature Range -40 +60 °C, -20 +60 °C
Maximum Operating Temperature +60°C
Minimum Operating Temperature -40 °C, -20 °C
Special Features IP20 Relay Base, Reinforced Insulation, Safe Isolation
Standards Met -15, -7, CE Compliant, EN 50178, EN 60079-0, IEC 60664, UL Listed, USA Certified
Life 3 x 10^7 (Mechanical) cycles
27 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
21,50
(excl. BTW)
26,02
(incl. BTW)
Aantal stuks
Per stuk
1 +
21,50 €
Related Products
Pre-assembled relay module with Push-in connection, consisting of: ...
Description:
Pre-assembled relay module with Push-in connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, retaining bracket. Contact type: 1 N/O contact, max. switch-on current up to 130 A peak, 80 A (20 ms) input voltage 24 V ...
The RS485 to RS485 Bus Repeater from Phoenix ...
Description:
The RS485 to RS485 Bus Repeater from Phoenix Contact is designed for use on virtually all 2-wire RS485 bus systems such as PROFIBUS and MODBUS. The slim, DIN rail mountable repeater device does not need any special cables meaning that ...
Finder 38 series relay interface modules are an ...
Description:
Finder 38 series relay interface modules are an ideal interface for PLC and electronic systems. Din Rail mounting Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm or 14 mm wide versions available. ...
A four-terminal converter enabling NPN to PNP or ...
Description:
A four-terminal converter enabling NPN to PNP or PNP to NPN signal inversion. The DEK-TR/INV signal inverter has a screw connection and is designed to invert the signals of ground switching NPN transistor outputs into positive PNP outputs and vice ...