Arduino, A000056

  • RS-stocknr. 847-4888
  • Fabrikantnummer A000056
  • Fabrikant Arduino
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Arduino Due Development Boards

The Arduino Due is a development board based on the Atmel SAM3X8E microcontroller. The SAM3X8E is a 32-bit, ARM Cortex M3.

How to get started:

The Arduino Due already has everything on-board to support the MCU. Simply connect it to a PC via microUSB cable or power it via an AC-to-DC adapter or battery. (Please note these are not included)

What else is on-board?

Atmel SAM3X8E Microcontroller
54 x digital I/O pins (12 can be used as PWM outputs)
12 x Analogue inputs
4x UARTS
84 MHz quartz crystal
1 x USB OTG
2 x DAC
2 x TWI
1 x power jack
1 x SPI header
1 x JTAG header
1 x reset button
1 x erase button

Operating Voltage: 3.3V
FLASH Memory: 512 KB
SRAM: 96 KB
Clock Speed: 84 MHz
Dimensions: 101.52 x 53.3 mm

Does it work with the Arduino Shields?

Yes, the Due board works with all available Arduino Shields that run at 3.3V and are compliant with the 1.0 Arduino pinout:
- TWI: SDA and SCL pins that are near to the AREF pin.
- IOREF: allows an attached shield with the proper configuration to adapt to the voltage provided by the board. This enables shield compatibility with a 3.3V board like the Due and AVR-based boards which operate at 5V.
- An unconnected pin, reserved for future use.

Arduino Due Without Headers

The Arduino Due without headers is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analogue inputs, 4 UARTs (hardware serial ports), a 84MHz clock, an USB OTG capable connection, 2 DAC (digital to analogue), 2 TWI, power jack, an SPI header, JTAG header, reset button and an erase button. This board contains everything needed to support the microcontroller. You can simply connect it to a computer with a micro-USB cable or power it with an AC-to-DC adapter or battery to get started. The due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.
How to get started:
The Arduino Due already has everything on-board to support the MCU. Simply connect it to a PC via microUSB cable or power it via an AC-to-DC adapter or battery. (Please note these are not included)
What else is on-board?
Atmel SAM3X8E Microcontroller
54 x digital I/O pins (12 can be used as PWM outputs)
12 x Analogue inputs
4x UARTS
84 MHz quartz crystal
1 x USB OTG
2 x DAC
2 x TWI
1 x power jack
1 x SPI header
1 x JTAG header
1 x reset button
1 x erase button
Does it work with the Arduino Shields?
Yes, the Due board works with all available Arduino Shields that running at 3.3V and are compliant with the 1.0 Arduino pinout:
- TWI: SDA and SCL pins that are near to the AREF pin.- IOREF: allows an attached shield with the proper configuration to adapt to the voltage provided by the board. This enables shield compatibility with a 3.3V board like the Due and AVR-based boards which operate at 5V.- An unconnected pin, reserved for future use. Arduino ARM Development Boards
Warning
the Arduino Due board runs at 3.3V (which is different to most other Arduino boards). Applying voltages higher than 3.3V to any I/O pin may cause damage.

Features and Benefits

• Input voltage ranges between 7V and 12V
• It has flash memory of 512KB and SRAM of 96KB
• It has clock speed of 84MHz
• SDA and SCL pins that are near to the AREF pin
• IOREF allows an attached shield with the proper configuration to adapt to the voltage provided by the board

Applications

• Communication
• Embedded system

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Arduino ARM Development Boards

We have a range of Arduino boards at RS that feature a 32-bit ARM microcontroller at the core. The Due with a SAM3X8E ARM Cortex-M3 and the M0/M0 Pro with a SAMD21G18 ARM Cortex-M0.

Warning

  • the Arduino Due board runs at 3.3V (which is different to most other Arduino boards). Applying voltages higher than 3.3V to any I/O pin may cause damage.
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
226 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
34,67
(excl. BTW)
41,95
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
34,67 €
5 - 9
33,80 €
10 +
32,94 €
Related Products
An Optical Pulse Sensor Evaluation board from ROHM ...
Description:
An Optical Pulse Sensor Evaluation board from ROHM intended for use with the Arduino Sensor Shield Evaluation Kit, RS 125-0453. The modular board includes the BH1790GLC optical sensor IC and suitable green LEDs allowing human pulse detection via finger contact. ...
MikroElektronika has designed a range of boards to ...
Description:
MikroElektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket. All in one click!Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, UART ...
RS485 2 click carries the MAX3471 half-duplex transceiver ...
Description:
RS485 2 click carries the MAX3471 half-duplex transceiver intended for lithium battery-powered RS-485/RS-422 applications. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface with additional functionality provided ...
These boards facilitate rapid implementation and evaluation of ...
Description:
These boards facilitate rapid implementation and evaluation of applications that use Controller Area Network (CAN) and Local Interconnect Network (LIN) interfaces and are implemented on dsPIC33F DSCs and PIC24 16-bit microcontrollers.,AC164130 supports connection to the Explorer 16 Development Board ...