Lantronix, xPico Ethernet Interface Board, XPC100100K-02

  • RS-stocknr. 783-2744
  • Fabrikantnummer XPC100100K-02
  • Fabrikant Lantronix
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

xPico Ethernet Embedded Device Server

xPico is an extremely compact System-on-Module that provides 10Base-T or 100Base-TX Ethernet connectivity on virtually any device with a UART serial interface. The included industry-proven Lantronix device server application and full IP stack allow seamless remote access to device data simplifying design integration while providing robust connectivity. A key feature of the xPico is that there is virtually no need to write a single line of code, translating to a much lower development cost and faster time-to-market.

XPC100100B-01 xPico Ethernet Module (RS Part No. 783-2740)
Ethernet 10Base-T or 100Base-TX (Auto-sensing)
Protocols: TCP/IP, UDP/IP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, AutoIP, and HTTP
SNMP, Telnet, Serial, Internal Web Server, and Microsoft Windows-based utility for web configuration
Security: 256-bit AES Encryption
Internal Web Server: Storage Capacity: 384KB for Web Pages
Based on the DSTni-EX Enhanced 16-bit x86 architecture with 512KB Flash memory, 256KB SRAM
Firmware upgradeable via TFTP and Serial Port
Host communication: serial UART with RTS/CTS flow control
Data Rate: 300bps to 921.6kbps
8 x GPIO pins
Power supply: +3.3Vdc
Operating temperature range: -40 to +85°C
Package format: SMT
Dimensions: 24 x 16.5 x 5.64mm
Included Software: MS Windows-based DeviceInstaller, Com Port Redirector

XPC100100K-02 xPico Ethernet Development Kit (RS Part No. 783-2744)
XPC100100B-01 xPico Ethernet Module
DE9 serial port connector for RS-232/422/485 communication
DE9 serial port connector for RS-232 communication
RJ45 Ethernet connector and PoE port
miniUSB socket with UART-USB Bridge
On-board Power-over-Ethernet (PoE) regulator
System and Ethernet status LEDs
Header for access to all logic xPico pins
Reset pushbutton
Set Default pushbutton
Power switch
Powered from USB or Ethernet connection

Supplied with

Development kit includes: 3m RS-232 null-modem cable, 3m CAT5 Ethernet cable

Specificaties
Kenmerk Waarde
Interface Function Ethernet
Kit Classification Interface Board
Kit Name XPico
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 03/02/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
103,84
(excl. BTW)
125,65
(incl. BTW)
Aantal stuks
Per stuk
1 +
103,84 €
Related Products
xChips are a rapid electronics development ecosystem to ...
Description:
xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.xChips ...
This Microchip Evaluation Board demonstrates the MCP19111 digitally ...
Description:
This Microchip Evaluation Board demonstrates the MCP19111 digitally enhanced PWM Controller in a PMBus-enabled Point-of-Load Converter application. The board converts a 7V to 14V input range to an adjustable output of 0.8V to 3.6V. Nearly all operational and control system ...
xChips are a rapid electronics development ecosystem to ...
Description:
xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.xChips ...
Environmental energy can be harvested and converted to ...
Description:
Environmental energy can be harvested and converted to electricity for small autonomous devices, making them self sufficient. For use where mains power is unavailable or costly, where batteries are costly or difficult to replace and where energy is needed only ...