Arduino, MKR Proto Shield Prototyping Shield for MKR Board, TSX00001

  • RS-stocknr. 169-7586
  • Fabrikantnummer TSX00001
  • Fabrikant Arduino
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

The MKR Proto Shield is a prototyping shield designed for your MKR board. This shield easily plugs onto your MKR using its provided female/male headers, and offers a duplicate breakout for each pin on the board along with many solderable through-holes on a standard 0.1” grid (2.54mm).

Specificaties
Kenmerk Waarde
Interface Function Prototyping
Kit Classification Shield
For Use With MKR Board
Kit Name MKR Proto Shield
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
6,58
(excl. BTW)
7,96
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
6,58 €
5 - 9
6,45 €
10 +
6,32 €
Related Products
This pHAT provides a super affordable high-quality DAC ...
Description:
This pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pumps out 24-bits at 192KHz from the Raspberry Pi's I2S interface on its 2x20 pin GPIO header. Use pHAT DAC to build a tiny, lush-sounding streaming music ...
Demonstration boards for the Silicon Labs TS1110 range. ...
Description:
Demonstration boards for the Silicon Labs TS1110 range. These electronic circuit breakers use a bidirectional current-sensing amplifier to detect the current limit and disconnect the load by using an external P-Channel MOSFET. They have an internal current limit comparator with ...
The NB6L14M is a 3.0GHz differential 1:4 CML ...
Description:
The NB6L14M is a 3.0GHz differential 1:4 CML clock or data fanout buffer. The differential inputs incorporate internal 50-ohm termination resistors that are accessed through the VT pin. This feature allows the NB6L14M to accept various logic standards, such as ...
The NB6L14 is a 3.0 GHz differential 1:4 ...
Description:
The NB6L14 is a 3.0 GHz differential 1:4 LVPECL fanout buffer. The differential inputs incorporate internal 50-ohm termination resistors that are accessed through the VT pin. This feature allows the NB6L14 to accept various logic standards, such as LVPECL, LVCMOS, ...