Pi Supply Amplifier HAT for Raspberry Pi, JustBoom Amp HAT

  • RS-stocknr. 122-8185
  • Fabrikantnummer JustBoom Amp HAT
  • Fabrikant Pi Supply
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

JustBoom Amp HAT for Raspberry Pi

JustBoom Amp HAT is a high-quality audio amplifier with digital to analogue converter designed specifically for the Raspberry Pi (models: A+, B+, 2B or 3B). No external sound cards or DACs are required. Easy to install and use, stack the plug-and-play add on board (HAT) onto your Raspberry Pi. By connecting your Amp HAT to a set of passive speakers allows streaming from the Cloud or local network. Then enjoy a high-quality audio playback within minutes of setting up this
Raspberry Pi HAT.

Applications:
• Multi-room streaming/local audio player
• Interactive art projects with audio requirement
• Arcade table projects with high quality, immersive audio
• Streaming (either from cloud or network storage) high-definition audio player
• Internet radio player with high-quality stereo audio
• Refit old radios with high quality streaming audio

Features:
• Full high-quality audio - 192 kHz / 32 bit
• 2 x 55 W peak output at 8 Ω (2 x 30 W RMS)
• Includes both a DAC and power amplifier - connect to your passive speakers
• Back-powers the Raspberry Pi over the GPIO (with full HAT-compliant protection) at 2.5A so only one power supply required for the whole system.
• Plug and play compatibility for ease of use
• Hardware and software volume control from your Raspberry Pi
• Onboard, hardware jumpers for configuring mute and gain settings (jumpers could optionally be changed with switches)
• Mute/enable with GPIO22 (can be overridden by using jumper J4)
• No soldering required
• Compatible with Raspberry Pi A+, B+, 2B and the new 3B (and also compatible with the Raspberry Pi Zero, but we would recommend the JustBoom Amp Zero for this purpose)
• Mounting hardware included
• Optional IR receiver included in package
• Unused GPIO pins still accessible via unpopulated extension header
• Fully HAT compliant
• Full driver support in Raspbian / NOOBS
• Compatible with OSMC / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others

Specificaties
Kenmerk Waarde
Interface Function Amplifier
Kit Classification HAT
For Use With Raspberry Pi
387 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
64,99
(excl. BTW)
78,64
(incl. BTW)
Aantal stuks
Per stuk
1 +
64,99 €
Related Products
The Adafruit PiTFT features a 2.4” display with ...
Description:
The Adafruit PiTFT features a 2.4” display with 320 x 240 16-bit colour pixels and a resistive touch overlay. As it is in HAT form, it fits neatly on top of your Raspberry Pi. (Compatible with Pi Model Zero, A+, ...
The IES-SHIELD-UART, from Intelligent Embedded Solutions, is an ...
Description:
The IES-SHIELD-UART, from Intelligent Embedded Solutions, is an Arduino Uno Shield for large TFT integration. The Arduino is a popular open-source electronics prototyping platform used by designers, hobbyists and artists. It is easy-to-use hardware and software which uses flexible design ...
LiPo SHIM (formerly known as Zero LiPo) aims ...
Description:
LiPo SHIM (formerly known as Zero LiPo) aims to give you the most compact Raspberry Pi power supply possible. You can either solder the 0.8mm thick PCB directly onto the GPIO pins on your Pi for a permanent solution, or ...
By adding two mikroBUS™ sockets to your Raspberry ...
Description:
By adding two mikroBUS™ sockets to your Raspberry Pi 3, the Pi 3 click shield allows you to experiment with hundreds of mikroBUS click boards™ from an ever expanding range. These include WiFi, Lora, Bluetooth, GSM, GPS, RFID, OLED, speech ...