Keysight Technologies U1461A, Insulation Tester 260GΩ CAT III 1000 V, CAT IV 600 V RS Calibration

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MY
Productomschrijving

U1461A Insulation Multimeter OLED display 50V to 1kV

The U1461A insulation resistance tester is ideal for predictive and preventive maintenance measurement tasks in electrical and industrial applications. By adding a Bluetooth® adapter to the U1461A, you are able to perform tests remotely using a Windows PC or on iOS / Android smart devices.Test reports can be generated in a tabulated or graphical form for easy interpretation and analysis.

Wireless insulation resistance testing via PC or iOS/Android based smart devices
Automatic test report generation
50 V / 100 V / 250 V / 500 V / 1000 V test voltages
Measure up to 260 GΩ
Timed / PI / DAR test
Adjustable test output voltage from 10 V to 1.1 kV
4.5 digit full featured DMM with OLED display
Measures AC voltage, DC voltage, AC current, DC current, resistance, capacitance, diode, continuity and temperature
Low pass filter
Non-contact AC voltage detection (Vsense)
IP 67 rated
CAT III 1000 V / CAT IV 600 V

Supplied with

Hard carrying case, Alligator clips (red and black), Test leads with 4 mm probe (red and black) and 19 mm probe (red and black), IR-to-USB cable (U1173B), 4 x AA Alkaline batteries, Remote switch probe with adapter, IR-to-Bluetooth adapter (U1117A), Operating instruction (U1117A), Thermocoupler adapter (J/K-Type), bead (J-Type and K-Type), Quick Start Guide.

Keysight Technologies Insulation Tester

The Keysight Technologies 260G ohm insulation tester is ideal for predictive and preventive maintenance measurement tasks in electrical as well as industrial applications. By adding a Bluetooth adapter, you can perform tests remotely using a Windows PC or on iOS/Android smart devices. The test reports can be generated in a tabular or graphical format for easy interpretation and analysis. It measures AC voltage, DC voltage, resistance, capacitance and continuity. The testing voltage of this tester ranges between 50V and 100V. This device is battery powered and has an AA battery type.

Supplied with Hard carrying case, alligator clips (red and black), test leads with 4mm probe (red and black) and 19mm probe (red and black), IR-to-USB cable (U1173B), 4 x AA alkaline batteries, remote switch probe with adapter, Thermocoupler adapter (J/K-Type), bead (J-Type and K-Type) and quick start guide

Features and Benefits

• Adjustable test output voltage from 10V to 1.1kV
• Automatic test report generation
• Non-contact AC voltage detection
• Timed/PI/DAR test
• 4.5 digit full featured DMM with OLED display
• Wireless insulation resistance testing via PC or iOS/Android smart devices

Certifications

• CAT III 1000V
• CAT IV 600V
• CE certified
• CSA certified
• EN61557
• IP67 rated

Keysight Technologies Insulation Resistance Testers

Specificaties
Kenmerk Waarde
Tester Type Insulation Tester
Minimum Test Voltage 50V
Maximum Test Voltage 1000V
Maximum Insulation Resistance Measurement 260GΩ
Display Type OLED
Calibrated RSCAL
Test Current 1mA
Battery Life 160 h
Minimum Operating Temperature -40°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT III, CAT IV
Safety Category Voltage 600 V, 1000 V
Safety Category CAT III 1000 V, CAT IV 600 V
Weight 686g
Height 218mm
Battery Type AA
Model Number p U1461A
Length 58mm
Width 100mm
Dimensions 58 x 100 x 218mm
4 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
1.103,00
(excl. BTW)
1.334,63
(incl. BTW)
Aantal stuks
Per stuk
1 +
1.103,00 €
Related Products
Fluke 1650 series testers verify the safety of ...
Description:
Fluke 1650 series testers verify the safety of electrical installations in domestic, commercial and industrial applications.They allow electrical wiring to be certified to the new standard NF C 1500.These devices combine simplicity, efficiency, ruggedness and ergonomics to represent a new ...
The DT-500 checks insulation resistance for systems or ...
Description:
The DT-500 checks insulation resistance for systems or devices.A 500 V measuring voltage delivered by the device is used to perform this check (in compliance with NF C15-100).Phase / neutral shunt function.Battery-saving function.Live voltage indicator and battery status indicator.Belt clip ...
A range of insulation testers that meet the ...
Description:
A range of insulation testers that meet the relevant requirements of EN61557, BS7671, HD 384, IEC 364 and VDE 0413 for applications in all aspects of electrical contracting, building maintenance, testing, inspection and servicing. 20mm LCD display with true analogue ...
The MIT230 incorporates a range of safety and ...
Description:
The MIT230 incorporates a range of safety and operation features in one of the smallest electrical insulation testers available. Its LCD offers a combination of digital readout and analogue display, with an analogue pointer response for evaluating circuit charge and ...