Megger 1007-157 Insulation Tester Probe, For Use With MIT480

  • RS-stocknr. 611-1308
  • Fabrikantnummer 1007-157
  • Warranty 3 jaar
  • Fabrikant Megger
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

MIT480 Series Telecom Insulation & continuity test

Telecommunication insulation and continuity testers developed to meet the special requirements of telephone line testing, as well as the requirements of electrical contractors and industrial testing to CATIV 600V. All instruments meet TNV3 as well as IEC1010, HD384 and BSEN61557. The insulation test inhibit voltage has been raised to 75V to overcome interference between cables experienced at lower voltages, compared to 50V for standard cable testing.

All models:
Complies with EN 61010-1 CATIV 600V safety rating
200mA & 20mA Continuity testing
Insulation test voltage display
75V test inhibit
TRMS and DC Voltage measurement
Dual Digital Display and Analogue bar-graph
Alkaline or NiMH rechargeable battery operation
IP54 weatherproof housing
Test lock allows the insulation test to be held on indefinitely
MIT480 specific features
50V & 100V insulation testing
100Gohms insulation range

MIT481 additional features
50V, 100V, 250V, 500V, 1000V insulation tests
200Gohms insulation range
Leakage current display
kΩ resistance measurement
Timer, PI and DAR insulation tests
Insulation limit alarms
0.1nF to 10uF Capacitance measurement
Cable length calculated from an adjustable cable capacitance reference (default 50nF/km).
Test result storage (>1000)
MIT485 additional features
Result download
Bluetooth capability (requires Bluetooth enabled PC or USB plus Bluetooth adaptor)

Supplied with

Hard carry case, rubber boot with stand, silicone test lead set, SP5 remote switch probe, 5 off AA alkaline batteries & instructions (CD-ROM).

Specificaties
Kenmerk Waarde
Accessory Type Probe
For Use With MIT480
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
8 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
84,00
(excl. BTW)
101,64
(incl. BTW)
Aantal stuks
Per stuk
1 +
84,00 €
Let op:
dit artikel is voorzien van een UK Plug.
Related Products
The Tektronix ’long nose’ style clamp-on probe uses ...
Description:
The Tektronix ’long nose’ style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. Equipped with a BNC connector, it can be used with a shrouded banana plug adapter*1. It can also be used ...
Fluke 1650 series testers verify the safety of ...
Description:
Fluke 1650 series testers verify the safety of electrical installations in domestic, commercial and industrial applications.They allow electrical wiring to be certified to the new standard NF C 1500.These devices combine simplicity, efficiency, ruggedness and ergonomics to represent a new ...
The HAL 101 offers simple straightforward operation in ...
Description:
The HAL 101 offers simple straightforward operation in a factory test or lab/compliance environment. Providing simple manual testing or complete automated operation, equipment can be tested quickly and safely. Fast automatic production testing using sequence capabilityPerforms a.c./d.c. Flash and d.c. ...
The Megger 999 Mohm, 200mA insulation and continuity ...
Description:
The Megger 999 Mohm, 200mA insulation and continuity tester is not only durable and easy to use but also incorporates a comprehensive set of features designed to ensure operator safety, even under conditions of accidental misuse. It includes automatic discharge ...